July 2005 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jul 1 01:13:14 CET 2005
Ending: Sun Jul 31 22:56:37 CET 2005
Messages: 356

• [Openswan Users]   Paul Wouters
• [Openswan Users]   Paul Wouters
• [Openswan Users]   foren titze
• [Openswan Users]   Siegfried Fischler
• [Openswan Users]   Paul Wouters
• [Openswan Users]   Paul Wouters
• [Openswan Users]   Paul Wouters
• [Openswan Users]   Siegfried Fischler
• [Openswan Users]   Paul Wouters
• [Openswan Users]   Siegfried Fischler
• [Openswan Users]   Siegfried Fischler
• [Openswan Users]   Paul Wouters
• [Openswan Users]   Jacco de Leeuw
• [Openswan Users]   Paul Wouters
• [Openswan Users] connection could not be established, client loop the request, both are NATed!   Jacco de Leeuw
• [Openswan Users] Openswan with error."Function not implemented" maybe due to Algorithm?   Craig Chandler
• [Openswan Users] Openswan with error."Function not implemented" maybe due to Algorithm?   Herbert Xu
• [Openswan Users] Another problem with openswan and xp, a helping hand needed   Thomas Rupp
• [Openswan Users] ASSERTION FAILED at state.c:316: st->st_suspended_md->st == st   Steve
• [Openswan Users] cannot respond to IPsec SA request because no connection is known   Siegfried Fischler
• [Openswan Users] cannot respond to IPsec SA request because no connection is known for ....   CDL_FM
• [Openswan Users] connection could not be established, client loop the request, both are NATed!   foren titze
• [Openswan Users] how to make a iptables rule based on ipsec interface, wehn interface ipsec+ don't exist in kernel 2.6   foren titze
• [Openswan Users] How to masquerade an ipsec paket, if no ipsec0 is there ?   foren titze
• [Openswan Users] IPSEC SA established, but the l2tpd daemon don't overtake the connection   Foren
• [Openswan Users] L2TP over IPsec over WLAN for OS-X Panther and others ...   Beat Zahnd
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   foren titze
• [Openswan Users] Native Ipsec Stack Kernel 2.6 work, but modul ipsec.o openswan-2.3.1 don't work; same config!   foren titze
• [Openswan Users] Openswan to Freeswan : IPSec SA established but ping is not working   naveen kumar
• [Openswan Users] Openswan with error."Function not implemented" maybe due to Algorithm?   Áõºè¾ü
• [Openswan Users] Probelm with host reachability when ipsec tunnel is operational   Phillip Gersekowski
• [Openswan Users] Probelm with host reachability when ipsec tunnel is operational   Phillip Gersekowski
• [Openswan Users] The KLIPS can not be installed in RedHat9 ? (worrying....)   chenfeijie
• [Openswan Users] the SA cann't establish, i using x.509 certification   =?GB2312?B?zLjQ3tbx?=
• [Openswan Users] the SA cann't establish, i using x.509 certification   =?GB2312?B?zLjQ3tbx?=
• [Openswan Users] {Disarmed} Error Using Setkey (SA Conf): Must get supported Algos First   love_myself
• [Openswan Users] Problem: "encrypted Informational Exchange message is invalid" ... on CLIENT   Davide Bolcioni
• [Openswan Users] connection could not be established, client loop the request, both are NATed!]   foren titze
• [Openswan Users] connection could not be established, client loop the request, both are NATed!]   foren titze
• [Openswan Users] connection could not be established, client loop the request, both are NATed!]   Jacco de Leeuw
• [Openswan Users] connection could not be established, client loop the request, both are NATed!]   foren titze
• [Openswan Users] connection could not be established, client loop the request, both are NATed!]   Jacco de Leeuw
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   Paul Wouters
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   Foren
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   Bram Bouwens
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   Foren
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   Bram Bouwens
• [Openswan Users] Linux-Linux IPsec Tunnel ends at the gateway: no ping over the gateway in the next subnet   Foren
• [Openswan Users] Probelm with host reachability when ipsec tunnel is operational   Gömöri Zoltán
• [Openswan Users] Probelm with host reachability when ipsec tunnel is operational   Phillip Gersekowski
• [Openswan Users] Probelm with host reachability when ipsec tunnel is operational   Paul Wouters
• [Openswan Users] "ISAKMP SA established" BUT "state transition function for STATE_QUICK_R0 failed"   Jacco de Leeuw
• [Openswan Users] %hold 0 %acquire-netlink   Michael Jurney
• [Openswan Users] %hold 0 %acquire-netlink   Paul Wouters
• [Openswan Users] %hold 0 %acquire-netlink   Michael Jurney
• [Openswan Users] %hold 0 %acquire-netlink   Herbert Xu
• [Openswan Users] 2.4.0r6 and RHEL   Mitja Sladovic
• [Openswan Users] 2.4.0r6 and RHEL   Tuomo Soini
• [Openswan Users] 26sec using IPcomp   Herbert Xu
• [Openswan Users] 26sec using IPcomp   Marco Berizzi
• [Openswan Users] connection could not beestablished, client loop the request,both areNATed!]   foren titze
• [Openswan Users] About Openvpn   Anthony Kong
• [Openswan Users] About Openvpn   Roland Pope
• [Openswan Users] AES-256 SHA1 Group2   Cassio Bobsin Machado
• [Openswan Users] AES-256 SHA1 Group2   Paul Wouters
• [Openswan Users] AES-256 SHA1 Group2   Cassio Bobsin Machado
• [Openswan Users] AES-256 SHA1 Group2   Cassio Bobsin Machado
• [Openswan Users] AF_INET6 protocol family not supported   Felix
• [Openswan Users] AF_INET6 protocol family not supported   Paul Wouters
• [Openswan Users] again PIX and Openswan   Lelio Parisi
• [Openswan Users] Apple 10.4.1   Jacco de Leeuw
• [Openswan Users] Apple 10.4.1   Jacco de Leeuw
• [Openswan Users] Apple 10.4.1   Dennis Leist
• [Openswan Users] Apple 10.4.1   Paul Wouters
• [Openswan Users] Can't connect Win98 MSL2TP clienttoOpenSwanServer   Mark Cave-Ayland
• [Openswan Users] Can't connect Win98 MSL2TP clienttoOpenSwanServer   Jacco de Leeuw
• [Openswan Users] Can't connect Win98 MSL2TP clienttoOpenSwanServer   Mark Cave-Ayland
• [Openswan Users] Can't connect Win98 MSL2TP client toOpenSwanServer   Mark Cave-Ayland
• [Openswan Users] Can't connect Win98 MSL2TP client toOpenSwanServer   Jacco de Leeuw
• [Openswan Users] Cannot ping the vpn gateway   Gömöri Zoltán
• [Openswan Users] Cannot ping the vpn gateway   Bram Bouwens
• [Openswan Users] Cannot ping the vpn gateway   Gömöri Zoltán
• [Openswan Users] Cannot ping the vpn gateway   Gömöri Zoltán
• [Openswan Users] Cannot ping the vpn gateway   Paul Wouters
• [Openswan Users] Cannot ping the vpn gateway   Gömöri Zoltán
• [Openswan Users] CheckPoint Firewall Hybrid Mode   Manuel Mesquita T. F. Gomes
• [Openswan Users] CheckPoint Firewall Hybrid Mode   Michael Schwartzkopff
• [Openswan Users] CheckPoint Firewall Hybrid Mode   mei04014 at fe.up.pt
• [Openswan Users] CheckPoint Firewall Hybrid Mode   Michael Schwartzkopff
• [Openswan Users] CheckPoint Firewall Hybrid Mode   Manuel Mesquita T. F. Gomes
• [Openswan Users] compilation fails (setting aggressive and xauth to false) (fwd)   Albert Siersema
• [Openswan Users] compilation fails (setting aggressive and xauth to false) (fwd)   Paul Wouters
• [Openswan Users] Compiling 2.4.0dr8 Klips ....   Steve Bremer
• [Openswan Users] Compiling 2.4.0dr8 Klips ....   Alexander Hellkuhl
• [Openswan Users] Compiling 2.4.0dr8 Klips ....   Paul Wouters
• [Openswan Users] Compiling 2.4.0dr8 Klips ....   Alexander Hellkuhl
• [Openswan Users] Compiling 2.4.0dr8 Klips ....   Alexander Hellkuhl
• [Openswan Users] configuration issues   George Fitz
• [Openswan Users] Connecting to Openswan from Windows XP Pro   Tim P
• [Openswan Users] Connecting to Openswan from Windows XP Pro   Jacco de Leeuw
• [Openswan Users] Connecting to Openswan from Windows XP Pro   John A. Sullivan III
• [Openswan Users] Connecting to Openswan from Windows XP Pro   Albert Siersema
• [Openswan Users] Connecting to Openswan from Windows XP Pro   Tim P
• [Openswan Users] Connecting to Openswan from Windows XP Pro   Paul Wouters
• [Openswan Users] Data transport problem.   Thomas M Petersen - UNI2 A/S
• [Openswan Users] Data transport problem.   Paul Wouters
• [Openswan Users] Data transport problem.   Thomas M Petersen - UNI2 A/S
• [Openswan Users] Data transport problem.   Paul Wouters
• [Openswan Users] debugging - need to decrypt packet   jacp1 at cam.ac.uk
• [Openswan Users] Doubts regarding openswan   Nayna Jain
• [Openswan Users] FC2 vs. FC3   George Hadjichristofi
• [Openswan Users] Fedora Core 2/3 kernel versions   George Hadjichristofi
• [Openswan Users] firewall and certificates   Rob Mokkink
• [Openswan Users] firewall and certificates   Paul Wouters
• [Openswan Users] firewall and certificates   Norman Rasmussen
• [Openswan Users] Firewall Issue   John Friesen
• [Openswan Users] Firewall Issue   Gavin Henry
• [Openswan Users] Freeswan to Cisco Pix VPN accelerator acard   max max
• [Openswan Users] High Assurance Soft Remote   Peter Osterberg
• [Openswan Users] High Assurance Soft Remote   Paul Wouters
• [Openswan Users] How to see the outgoing decrypted packets with kernel 2.6 ?   Paul Wouters
• [Openswan Users] Hub and Spoke VPN   Marc Spiegelman
• [Openswan Users] Hub and Spoke VPN   Marc Spiegelman
• [Openswan Users] Hub and Spoke VPN   Paul Wouters
• [Openswan Users] Hub and Spoke VPN   Paul Wouters
• [Openswan Users] info about pix-vpn   Lelio Parisi
• [Openswan Users] insideLAN behind perimeter net   John A. Sullivan III
• [Openswan Users] insideLAN behind perimeter net   sibusiso xolo
• [Openswan Users] IPSEC status   George Fitz
• [Openswan Users] IPsec Transform refused   Craig Chandler
• [Openswan Users] ipsec/l2tp with ldap   alberts
• [Openswan Users] ipsec/l2tp with ldap   Albert SanuyGoñi
• [Openswan Users] ipsec/l2tp with ldap   Jacco de Leeuw
• [Openswan Users] Issues with L2TPNS and Openswan on Fedora Core 4   Tim P
• [Openswan Users] L2TP over IPsec over WLAN for OS-X Panther and others ...   Beat Zahnd
• [Openswan Users] L2TP over IPsec over WLAN for OS-X Panther and others ...   Jacco de Leeuw
• [Openswan Users] L2TP over IPsec over WLAN for OS-X Panther and others ...   Beat Zahnd
• [Openswan Users] L2TP over IPsec over WLAN for OS-X Panther and others ...   Beat Zahnd
• [Openswan Users] L2TP over IPsec over WLAN for OS-X Panther and others ...   Beat Zahnd
• [Openswan Users] L2TP over IPsec over WLAN for OS-X, Panther and others ...   Alan Whinery
• [Openswan Users] L2TP/IPsec server with NAT-T   Jacco de Leeuw
• [Openswan Users] Let's give it another try... Windows XP problems?!   Norman Rasmussen
• [Openswan Users] Let's give it another try... Windows XP problems?!   Vincent Tieleman
• [Openswan Users] MacOSX 10.4.2: same problems woth NAT-T and X.509   Jacco de Leeuw
• [Openswan Users] MacOSX 10.4.2: same problems woth NAT-T and X.509   Paul Wouters
• [Openswan Users] MacOSX 10.4.2: same problems woth NAT-T and X.509   Paul Wouters
• [Openswan Users] Malformed payload   Alessio
• [Openswan Users] Malformed payload   Alessio
• [Openswan Users] Malformed payload   Jacco de Leeuw
• [Openswan Users] Malformed payload   Alessio
• [Openswan Users] Malformed payload   Alessio
• [Openswan Users] Malformed payload   Alessio
• [Openswan Users] Multiple connection failed???   max max
• [Openswan Users] Multiple connection problems   Oliver Tomkins
• [Openswan Users] Multiple Tunnel Setup   Jeremy Mann
• [Openswan Users] Multiple Tunnel Setup   Norman Rasmussen
• [Openswan Users] Multiple Tunnel Setup   Jeremy Mann
• [Openswan Users] Multiple Tunnel Setup   Norman Rasmussen
• [Openswan Users] NAT-T issues with 2.4dr3   Steve Bremer
• [Openswan Users] NAT-T issues with 2.4dr3   Steve Bremer
• [Openswan Users] NAT-T issues with 2.4dr3 (fwd)   Paul Wouters
• [Openswan Users] NAT-T issues with 2.4dr3 (fwd)   Steve Bremer
• [Openswan Users] NAT-T problems   kumar nani
• [Openswan Users] Negotiating NATT   Michael
• [Openswan Users] NULL Encryption   neha sharda
• [Openswan Users] one router or two   sibusiso xolo
• [Openswan Users] Only single and initial connection permitted   Oliver Tomkins
• [Openswan Users] Only single and initial connection permitted   Norman Rasmussen
• [Openswan Users] Only single and initial connection permitted   Jacco de Leeuw
• [Openswan Users] Only single and initial connection permitted   Oliver Tomkins
• [Openswan Users] Only single and initial connection permitted   Oliver Tomkins
• [Openswan Users] Only single and initial connection permitted   Paul Wouters
• [Openswan Users] Open Swan -> DSL -> Linksys   Walter Wickersham
• [Openswan Users] Open Swan -> DSL -> Linksys   Peter Osborne
• [Openswan Users] OpenS/WAN 2.3.1 crashes OpenS/WAN 2.2.x installs ?   Mitja Sladovic
• [Openswan Users] OpenS/WAN 2.3.1 crashes OpenS/WAN 2.2.x installs ?   Paul Wouters
• [Openswan Users] OpenS/WAN 2.3.1 crashes OpenS/WAN 2.2.x installs ?   Albert Siersema
• [Openswan Users] OpenS/WAN 2.3.1 crashes OpenS/WAN 2.2.x installs ?   Albert Siersema
• [Openswan Users] OpenS/WAN 2.3.1 crashes OpenS/WAN 2.2.x installs ?   Mitja Sladovic
• [Openswan Users] OpenS/WAN 2.3.1 crashes OpenS/WAN 2.2.x installs ?   Albert Siersema
• [Openswan Users] OpenSwan + FC4   Phillip T. George
• [Openswan Users] openswan + l2tpd problem   Marco Pelli
• [Openswan Users] OpenSwan 2.3.1 - Problems with "IKE="   Cassio Bobsin Machado
• [Openswan Users] Openswan 2.3.1 and 2.6 Kernel   Axel Thimm
• [Openswan Users] OpenSwan 2.3.1 implements AES on Phase 1?   Cassio Bobsin Machado
• [Openswan Users] OpenSwan 2.3.1 implements AES on Phase 1?   Cassio Bobsin Machado
• [Openswan Users] OpenSwan 2.3.1 implements AES on Phase 1?   Paul Wouters
• [Openswan Users] OpenSwan 2.3.1 implements AES on Phase 1?   Cassio Bobsin Machado
• [Openswan Users] OpenSwan 2.3.1 implements AES on Phase 1?   Stephan Scholz
• [Openswan Users] OpenSwan 2.3.1 implements AES on Phase 1?   Steve
• [Openswan Users] OpenSwan and Cisco. connection fails   lars
• [Openswan Users] Openswan and Safenet behind NAT   famleone at tin.it
• [Openswan Users] Openswan and Safenet behind NAT   Paul Wouters
• [Openswan Users] Openswan and Safenet behind NAT   famleone at tin.it
• [Openswan Users] Openswan and Safenet vpn client   luca
• [Openswan Users] Openswan and SuSE 9.3   Simon Christian
• [Openswan Users] OpenSWAN and unencrypted packets   Gunter Ohrner
• [Openswan Users] OpenSWAN and unencrypted packets   Gunter Ohrner
• [Openswan Users] OpenSWAN and unencrypted packets   Paul Wouters
• [Openswan Users] OpenSWAN and unencrypted packets   Gunter Ohrner
• [Openswan Users] openswan behind iptables   rob at mokkinksystems.com
• [Openswan Users] openswan behind iptables   Beat Zahnd
• [Openswan Users] Openswan on FC3   Jerry Kaidor
• [Openswan Users] Openswan on FC3   Michael Stelluti
• [Openswan Users] Openswan on FC3   Michael Stelluti
• [Openswan Users] Openswan on FC3   Eduardo Detrell
• [Openswan Users] Openswan on FC3   Eduardo Detrell
• [Openswan Users] Openswan on FC3   Trevor Hennion
• [Openswan Users] Openswan on FC3   Eduardo Detrell
• [Openswan Users] Openswan on FC3   Eduardo Detrell
• [Openswan Users] Openswan on FC3   Eduardo Detrell
• [Openswan Users] openswan on solaris   Rob Mokkink
• [Openswan Users] Openswan Version 2.4.0dr2 possible problem   Yiannis Mavroukakis
• [Openswan Users] Openswan Version 2.4.0dr2 possible problem   Paul Wouters
• [Openswan Users] Openswan Version 2.4.0dr2 possible problem   Tuomo Soini
• [Openswan Users] packet rejected: should have been encrypted   Bram Bouwens
• [Openswan Users] packet rejected: should have been encrypted   Jacco de Leeuw
• [Openswan Users] packet rejected: should have been encrypted   Bram Bouwens
• [Openswan Users] packet rejected: should have been encrypted - issue 267?   Bram Bouwens
• [Openswan Users] packet rejected: should have been encrypted - more logs   Bram Bouwens
• [Openswan Users] packet rejected: should have been encrypted - more logs   Bram Bouwens
• [Openswan Users] packet rejected: should have been encrypted - more logs   Paul Wouters
• [Openswan Users] passert(st->st_suspended_md->st == st) fix   Paul Wouters
• [Openswan Users] pix 506 6.3.4 and openswan 2.3.1 problem   Dmitry Melekhov
• [Openswan Users] pluto continuously restarting   martin f krafft
• [Openswan Users] pluto continuously restarting   martin f krafft
• [Openswan Users] pluto could not open /proc/net/if_inet6   max max
• [Openswan Users] pluto could not open /proc/net/if_inet6   Paul Wouters
• [Openswan Users] pluto crash with Openswan Version 2.4.0dr2   Norbert Wegener
• [Openswan Users] pluto crash with Openswan Version 2.4.0dr2   Norbert Wegener
• [Openswan Users] pluto crash with Openswan Version 2.4.0dr2   Paul Wouters
• [Openswan Users] Possible: Both ends of tunnel NAT'd?   Gavin Henry
• [Openswan Users] Possible: Both ends of tunnel NAT'd?   Norman Rasmussen
• [Openswan Users] Private & Public Internet IPs   Phillip T. George
• [Openswan Users] Private & Public Internet IPs   Phillip T. George
• [Openswan Users] Probelm with host reachability when ipsectunnelis operational   Gömöri Zoltán
• [Openswan Users] Probelm with host reachability when ipsectunnelis operational   Greg McGuire
• [Openswan Users] Probelm with host reachability when ipsec tunnelis operational   Greg McGuire
• [Openswan Users] Probelm with host reachability when ipsec tunnelis operational   Gömöri Zoltán
• [Openswan Users] Probelm with host reachability when ipsec tunnel is operational   Greg McGuire
• [Openswan Users] Probelm with host reachability whenipsectunnelis operational   Gömöri Zoltán
• [Openswan Users] problem about klips on linux2.6.10   gxshen
• [Openswan Users] Problem connecting Openswan to Cisco Pix 515   Chris Godfrey
• [Openswan Users] Problem connecting Openswan to Cisco Pix 515   Jacco de Leeuw
• [Openswan Users] Problem connecting Openswan to Cisco Pix 515   Paul Wouters
• [Openswan Users] Problem connecting Openswan to Cisco Pix 515   Chris Godfrey
• [Openswan Users] problem making starter in openswan 2.3.1   Paul Wouters
• [Openswan Users] problem making starter in openswan 2.3.1   Paul Wouters
• [Openswan Users] problem making starter in openswan 2.3.1   Steve
• [Openswan Users] problem making starter in openswan 2.3.1   Steve
• [Openswan Users] problem making starter in openswan 2.3.1   Steve
• [Openswan Users] problem making starter in openswan 2.3.1   Paul Wouters
• [Openswan Users] problem making starter in openswan 2.3.1   Steve
• [Openswan Users] problem with config   Rob Mokkink
• [Openswan Users] problem with config   Norman Rasmussen
• [Openswan Users] problem with config   Paul Wouters
• [Openswan Users] problem with nat   Rob Mokkink
• [Openswan Users] Problem with NAT-T   CDL_FM
• [Openswan Users] PSK, %any and NAT-T   Jacco de Leeuw
• [Openswan Users] Re: [strongSwan] Problems with cert from sub CA   Andreas Steffen
• [Openswan Users] Re: Client loops not any more; but the l2tpd daemon don't answers the request.   foren titze
• [Openswan Users] Re: help for multihome route   Bob Benstro
• [Openswan Users] Re: help for multihome route   Jacco de Leeuw
• [Openswan Users] Re: help for multihome route   Bob Benstro
• [Openswan Users] Re: help for multihome route   Bob Benstro
• [Openswan Users] Re: MacOSX 10.4.2   Alan Whinery
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Alan Whinery
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Alan Whinery
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Alan Whinery
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Jacco de Leeuw
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Colin Johnston
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Paul Wouters
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Jacco de Leeuw
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Paul Wouters
• [Openswan Users] Re: MacOSX 10.4.2: same problems woth NAT-T   Paul Wouters
• [Openswan Users] Re: second Tunnel disconnects first one   Jacco de Leeuw
• [Openswan Users] Re: Users Digest, Vol 20, Issue 48   Riccardo Tartari
• [Openswan Users] Reg: Openswan 2.6 Installation procedures   Jacco de Leeuw
• [Openswan Users] Reg: Openswan 2.6 Installation procedures   Eshwar
• [Openswan Users] Reg: Openswan 2.6 Installation procedures   Paul Wouters
• [Openswan Users] Reg: Openswan 2.6 Installation procedures   Eshwar
• [Openswan Users] Reg: Openswan 2.6 Installation procedures   Paul Wouters
• [Openswan Users] RHEL 4 with ipsec   Morgan Marodin
• [Openswan Users] RHEL 4 with ipsec   Randy B
• [Openswan Users] RHEL 4 with ipsec   Gary W. Smith
• [Openswan Users] RHEL 4 with ipsec   Paul Wouters
• [Openswan Users] RHEL 4 with ipsec   Roland Pope
• [Openswan Users] Road warrior w/virtual ip   Jeremy Baker
• [Openswan Users] Selecting the right connection   lux
• [Openswan Users] Selecting the right connection   Jacco de Leeuw
• [Openswan Users] Selecting the right connection   lux
• [Openswan Users] Selecting the right connection   Jacco de Leeuw
• [Openswan Users] Setup not working   Paul Wouters
• [Openswan Users] Setup not working   Shuveb Hussain
• [Openswan Users] sock.h failed   Brad Swartz
• [Openswan Users] sock.h failed   Paul Wouters
• [Openswan Users] sock.h failed   Jacco de Leeuw
• [Openswan Users] Squeezing Ipsec through a Wireless Router   Jerome Kaidor
• [Openswan Users] Squeezing Ipsec through a Wireless Router   Jerome Kaidor
• [Openswan Users] Squeezing Ipsec through a Wireless Router   Jacco de Leeuw
• [Openswan Users] Status of Openswan 2.3.2   Steve Bremer
• [Openswan Users] Status of Openswan 2.3.2   Paul Wouters
• [Openswan Users] Status of Openswan 2.3.2   Sandor Geller
• [Openswan Users] Status of Openswan 2.3.2   Paul Wouters
• [Openswan Users] Status of Openswan 2.3.2   Yiannis Mavroukakis
• [Openswan Users] Status of Openswan 2.3.2   Paul Overton
• [Openswan Users] Status of Openswan 2.3.2   Jacco de Leeuw
• [Openswan Users] Status of Openswan 2.3.2   Yiannis Mavroukakis
• [Openswan Users] Status of Openswan 2.3.2   Paul Wouters
• [Openswan Users] Status of Openswan 2.3.2   Paul Wouters
• [Openswan Users] Status of Openswan 2.3.2   Paul Wouters
• [Openswan Users] Status of Openswan 2.3.2   Bram Bouwens
• [Openswan Users] Status of Openswan 2.3.2   Paul Wouters
• [Openswan Users] Status of Openswan 2.3.2   Norbert Wegener
• [Openswan Users] Status of Openswan 2.3.2 - Yippee!!!   Bram Bouwens
• [Openswan Users] STF_INTERNAL_ERROR   Jim Ewert
• [Openswan Users] STF_INTERNAL_ERROR   Paul Wouters
• [Openswan Users] STF_INTERNAL_ERROR   Jim Ewert
• [Openswan Users] Test site-site tunnel in a limited environment   wang juntao
• [Openswan Users] tunnel or transport?   Marco Berizzi
• [Openswan Users] Unable to sent the file between two clients   Eshwar
• [Openswan Users] Unable to sent the file between two clients   Paul Wouters
• [Openswan Users] Virtual interfaces   Lionel Cottin
• [Openswan Users] Virtual interfaces   Paul Wouters
• [Openswan Users] Virtual interfaces   Tuomo Soini
• [Openswan Users] Virtual interfaces   Lionel Cottin
• [Openswan Users] Virtual interfaces   Tuomo Soini
• [Openswan Users] VOIP h232   Justin B. Kay
• [Openswan Users] VPN client side firewalls rule??   max max
• [Openswan Users] VSNPRINTF   Vinod Chandran
• [Openswan Users] When running openswan, there comes a core dump!!   chenfeijie
• [Openswan Users] When running openswan, there comes a core dump!!   Jacco de Leeuw
• [Openswan Users] Windows works Linux does not.   Brett Curtis
• [Openswan Users] Windows works Linux does not.   Brett Curtis
• [Openswan Users] Windows works Linux does not.   Brett Curtis
• [Openswan Users] Windows works Linux does not.   Brett Curtis
• [Openswan Users] Windows works Linux does not.   Paul Wouters
• [Openswan Users] Windows works Linux does not.   Paul Wouters
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Mihai Costache
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Mihai Costache
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Mihai Costache
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Paul Wouters
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Paul Wouters
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Norman Rasmussen
• [Openswan Users] windows xp sp2 nated and openswan+l2tp   Albert Siersema
• [Openswan Users] WinXP -> OpenSwan problem   Paul Wouters
• [Openswan Users] WinXP -> OpenSwan problem   Toby Chamberlain
• [Openswan Users] Worrying for making openswan 2.3.1 failed!   Paul Wouters
• [Openswan Users] Worrying for making openswan 2.3.1 failed!   chenfeijie
• [Openswan Users] {Spam?} "ISAKMP SA established" BUT "state transition function for STATE_QUICK_R0 failed"   =?gb2312?B?d2p0X2VyaWM=?=
• [Openswan Users] {Spam?} I Bulid some VPN tunnels,But when the second Tunnel connected ,the first is disconnect ,who can tell me why.   =?gb2312?B?dHBs?=
• AW: [Openswan Users] AF_INET6 protocol family not supported   Gessler Gerhard
• FW: [Openswan Users] 2.3.1 Problems   Yiannis Mavroukakis
• FW: [Openswan Users] 2.3.1 Problems   Yiannis Mavroukakis
• Solved: [Openswan Users] OpenSwan and Cisco. connection fails   lars
• {Spam?} =?gb2312?B?UmU6IFtPcGVuc3dhbiBVc2Vyc10gIklTQUtNUCBTQSBlc3RhYmxpc2g=?= =?gb2312?B?ZWQiIEJVVCAic3RhdGUgdHJhbnNpdGlvbiBmdW5jdGlvbiBmb3IgU1Q=?= =?gb2312?B?QVRFX1FVSUNLX1IwIGZhaWxlZCI=?=   =?gb2312?B?d2p0X2VyaWM=?=

Last message date: Sun Jul 31 22:56:37 CET 2005
Archived on: Mon Aug 1 14:37:00 CET 2005

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...