[Openswan Users] Openswan on FC3

[Michael Stelluti]

Eduardo Detrell wrote:

> Hello:
>  
> This is the anwer of it:
>  
> [root at piolin ~]# ipsec auto --up piolin
> 021 no connection named "piolin"
> This connection is named in /etc/ipsec.conf.
>  
> Thanks for your help.
>  
> Regards.
>
>     ----- Original Message -----
>     *From:* Michael Stelluti <mailto:mikes at tygerteam.com>
>     *To:* Eduardo Detrell <mailto:edetrell at fain.es>
>     *Cc:* users at openswan.org <mailto:users at openswan.org>
>     *Sent:* Thursday, July 28, 2005 7:02 PM
>     *Subject:* Re: [Openswan Users] Openswan on FC3
>
>     Eduardo Detrell wrote:
>
>>     Hello:
>>      
>>     When I try to up a tunnel with this command:"ipsec manual --up
>>     piolin" the system answer me: ipsec manual: fatal error in
>>     "piolin": no IPsec-enabled interfaces found"
>>      
>>     I test de installation:
>>      
>>     [root at piolin ~]# ipsec verify
>>     Checking your system to see if IPsec got installed and started
>>     correctly:
>>     Version check and ipsec on-path                                 [OK]
>>     Linux Openswan U2.3.1/K2.6.11-1.35_FC3smp (netkey)
>>     Checking for IPsec support in kernel                            [OK]
>>     Checking for RSA private key (/etc/ipsec.secrets)               [OK]
>>     Checking that pluto is running                                  [OK]
>>     Two or more interfaces found, checking IP forwarding            [OK]
>>     Checking NAT and MASQUERADEing                                  [OK]
>>     Checking for 'ip' command                                       [OK]
>>     Checking for 'iptables' command                                 [OK]
>>     Checking for 'setkey' command for NETKEY IPsec stack support    [OK]
>>     Opportunistic Encryption Support                               
>>     [DISABLED]
>>     Please, anybody can help me?. Thanks.
>>      
>>     Regards.
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>Users mailing list
>>Users at openswan.org
>>http://lists.openswan.org/mailman/listinfo/users
>>  
>>
>     The correct command to manually initiate your connection is "ipsec
>     auto --up piolin".
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Users mailing list
>Users at openswan.org
>http://lists.openswan.org/mailman/listinfo/users
>  
>
this line [ 021 no connection named "piolin" ] tells me that the name
piolin is not the correct name in the ipsec.conf file, but you say it
is.  can you send a copy of your conn file.  the name for the connection
should be whatever you put after the word conn in your file.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20050728/e9feb093/attachment-0001.htm