[Openswan Users] Openswan on FC3
Eduardo Detrell
edetrell at fain.es
Thu Jul 28 20:32:17 CEST 2005
Hello:
This is the anwer of it:
[root at piolin ~]# ipsec auto --up piolin
021 no connection named "piolin"
This connection is named in /etc/ipsec.conf.
Thanks for your help.
Regards.
----- Original Message -----
From: Michael Stelluti
To: Eduardo Detrell
Cc: users at openswan.org
Sent: Thursday, July 28, 2005 7:02 PM
Subject: Re: [Openswan Users] Openswan on FC3
Eduardo Detrell wrote:
Hello:
When I try to up a tunnel with this command:"ipsec manual --up piolin" the system answer me: ipsec manual: fatal error in "piolin": no IPsec-enabled interfaces found"
I test de installation:
[root at piolin ~]# ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path [OK]
Linux Openswan U2.3.1/K2.6.11-1.35_FC3smp (netkey)
Checking for IPsec support in kernel [OK]
Checking for RSA private key (/etc/ipsec.secrets) [OK]
Checking that pluto is running [OK]
Two or more interfaces found, checking IP forwarding [OK]
Checking NAT and MASQUERADEing [OK]
Checking for 'ip' command [OK]
Checking for 'iptables' command [OK]
Checking for 'setkey' command for NETKEY IPsec stack support [OK]
Opportunistic Encryption Support [DISABLED]
Please, anybody can help me?. Thanks.
Regards.
----------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users at openswan.org
http://lists.openswan.org/mailman/listinfo/users
The correct command to manually initiate your connection is "ipsec auto --up piolin".
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20050728/17fbcfaa/attachment.htm
More information about the Users
mailing list