October 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Oct 1 07:26:47 EDT 2008
Ending: Fri Oct 31 08:44:03 EDT 2008
Messages: 157

• [Openswan Users] Openswan + Fortigate shared key problem   Marcin J. Kowalczyk
  • [Openswan Users] Openswan + Fortigate shared key problem   Paul Wouters
    • [Openswan Users] Openswan + Fortigate shared key problem   Marcin J. Kowalczyk
• [Openswan Users] Openswan 2.6.14 (Fedora 9 revisited)   Michael H. Warfield
• [Openswan Users] can it be done   Matthew L. Bowman
• [Openswan Users] Can I share SA?   Jianqing Zhang
  • [Openswan Users] Can I share SA?   Paul Wouters
• [Openswan Users] Checking status on bug   Rick Cooper
  • [Openswan Users] Checking status on bug   Paul Wouters
• [Openswan Users] Difference between two *subnets configurations   Rolando Zappacosta
  • [Openswan Users] Difference between two *subnets configurations   Paul Wouters
    • [Openswan Users] Difference between two *subnets configurations   Rolando Zappacosta
• [Openswan Users] We cannot identify ourselves with either end of this connection   Adenilson Mezini - TI
  • [Openswan Users] We cannot identify ourselves with either end of this connection   Paul Wouters
• [Openswan Users] Multiple roadwarrior connections crossed   List Receiver
  • [Openswan Users] Multiple roadwarrior connections crossed   Paul Wouters
    • [Openswan Users] Multiple roadwarrior connections crossed   List Receiver
• [Openswan Users] ifb ipsec and traffic shaping problem   John McMonagle
• [Openswan Users] Sonicwall TZ180 and Openswan   Zoltán FARKAS
• [Openswan Users] IPsec/l2tp connection doesn't work so good..   Eugenio Vescovi
  • [Openswan Users] IPsec/l2tp connection doesn't work so good..   Janantha Marasinghe
• [Openswan Users] question about conn host-to-host or host-to-network   Christophe LAUVERNIER
  • [Openswan Users] question about conn host-to-host or host-to-network   Paul Wouters
• [Openswan Users] Considering authentication mode while selecting a connection to respond   hiren joshi
  • [Openswan Users] Considering authentication mode while selecting a connection to respond   Paul Wouters
    • [Openswan Users] Considering authentication mode while selecting a connection to respond   hiren joshi
• [Openswan Users] Two warriors behind the same NAT   Eugenio Vescovi
• [Openswan Users] [Announce] openswan-2.6.18 released   Paul Wouters
  • [Openswan Users] [Announce] openswan-2.6.18 released   List Receiver
    • [Openswan Users] [Announce] openswan-2.6.18 released   Paul Wouters
      • [Openswan Users] [Announce] openswan-2.6.18 released   List Receiver
      • [Openswan Users] [Announce] openswan-2.6.18 released   List Receiver
      • [Openswan Users] [Announce] openswan-2.6.18 released   List Receiver
• [Openswan Users] Using NAT-T with 2.6 linux kernel   Sujithra P
  • [Openswan Users] Using NAT-T with 2.6 linux kernel   Paul Wouters
• [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Daniel R. Koehler
  • [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Paul Wouters
• [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Daniel R. Koehler
  • [Openswan Users] Fail over IP + Openswan: Building and Integrating Virtual Private Networks   Igor Widlinski
    • [Openswan Users] Fail over IP + Openswan: Building and Integrating Virtual Private Networks   Ken Bantoft
      • [Openswan Users] Fail over IP + Openswan: Building and Integrating Virtual Private Networks   Igor Widlinski
      • [Openswan Users] Fail over IP + Openswan: Building and Integrating Virtual Private Networks   Paul Wouters
  • [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Janantha Marasinghe
  • [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Julien DELEAN
    • [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Paul Wouters
• [Openswan Users] Problem with NAT-T roadwarrior on Openswan 2.6.15dr2   Daniel R. Koehler
• [Openswan Users] Openswan 2.6.18 on a Linux 2.6 kernel   Chris The One and Only
  • [Openswan Users] Openswan 2.6.18 on a Linux 2.6 kernel   Michael H. Warfield
    • [Openswan Users] Openswan 2.6.18 on a Linux 2.6 kernel   Paul Wouters
• [Openswan Users] Ipsec/l2tp server behind nat, again(2)   Lux
  • [Openswan Users] Ipsec/l2tp server behind nat, again(2)   Brad Johnson
    • [Openswan Users] R: Ipsec/l2tp server behind nat, again(2)   Lux
      • [Openswan Users] R: Ipsec/l2tp server behind nat, again(2)   Tuomo Soini
      • [Openswan Users] R: R: Ipsec/l2tp server behind nat, again(2)   Lux
• [Openswan Users] initial Main Mode message received on ... but no connection has been authorized   Alfonso Viso
• [Openswan Users] Cisco VPN client   Brad Johnson
• [Openswan Users] openswan + ipvs : route back problem   Sebastien COUPPEY
  • [Openswan Users] openswan + ipvs : route back problem   Sebastien COUPPEY
• [Openswan Users] Openswan 2.6.18 on a Linux 2.6 kernel   Chris The One and Only
• [Openswan Users] no connection has been authorized   Alfonso Viso
  • [Openswan Users] no connection has been authorized   Paul Wouters
• [Openswan Users] pluto assertion   Brad Johnson
  • [Openswan Users] pluto assertion   Paul Wouters
• [Openswan Users] how can I configure Authentication-Method (3) from XAUTHInitPreShared (65001) to PSK (1)?   翱 李
• [Openswan Users] how can I configure Authentication-Method (3) from XAUTHInitPreShared (65001) to PSK (1)?   翱 李
• [Openswan Users] hi, I meet the same problem to you about the XAUTH mode how to change to PSK from XAUTHInitPreShared   翱 李
• [Openswan Users] My private keys not showing up with --listall   OCG Technical Support
  • [Openswan Users] My private keys not showing up with --listall   Brad Johnson
  • [Openswan Users] My private keys not showing up with --listall   OCG Technical Support
    • [Openswan Users] My private keys not showing up with --listall   Paul Wouters
  • [Openswan Users] My private keys not showing up with --listall   Paul Wouters
    • [Openswan Users] My private keys not showing up with --listall   OCG Technical Support
      • [Openswan Users] My private keys not showing up with --listall   Paul Wouters
      • [Openswan Users] My private keys not showing up with --listall   OCG Technical Support
      • [Openswan Users] My private keys not showing up with --listall   Paul Wouters
• [Openswan Users] no connection has been authorized   Alfonso Viso
  • [Openswan Users] no connection has been authorized   Paul Wouters
• [Openswan Users] Vista and Openswan L2TP IPSEC vpn connection problem   Danilo Godec
• [Openswan Users] Openswan 2.6.18 on a Linux 2.6 kernel   Chris The One and Only
• [Openswan Users] Cisco PIX 515 with endian firewall.   Bhupesh Karankar
• [Openswan Users] OpenSwan book - clarifications / questions   OCG Technical Support
• [Openswan Users] ipsec connection will be lost   Indunil Jayasooriya
  • [Openswan Users] ipsec connection will be lost   Paul Wouters
    • [Openswan Users] ipsec connection will be lost   Indunil Jayasooriya
      • [Openswan Users] ipsec connection will be lost   Paul Wouters
      • [Openswan Users] ipsec connection will be lost   Indunil Jayasooriya
• [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Jennifer Agarwal
  • [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Lawrence Manning
    • [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Paul Wouters
      • [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Jennifer Agarwal
    • [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Agent Smith
• [Openswan Users] Roadwarrior conn problem: need right IP address?   OCG Technical Support
  • [Openswan Users] Roadwarrior conn problem: need right IP address?   Paul Wouters
    • [Openswan Users] Roadwarrior conn problem: need right IP address?   OCG Technical Support
      • [Openswan Users] Roadwarrior conn problem: need right IP address?   Paul Wouters
      • [Openswan Users] Roadwarrior conn problem: need right IP address?   OCG Technical Support
      • [Openswan Users] Roadwarrior conn problem: need right IP address?   Paul Wouters
      • [Openswan Users] Roadwarrior conn problem: need right IP address?   OCG Technical Support
• [Openswan Users] Why binding to all interfaces?   OCG Technical Support
  • [Openswan Users] Why binding to all interfaces?   Paul Wouters
• [Openswan Users] has interfaces= syntax changed in 2.6.18 ?   OCG Technical Support
  • [Openswan Users] has interfaces= syntax changed in 2.6.18 ?   Paul Wouters
    • [Openswan Users] has interfaces= syntax changed in 2.6.18 ?   OCG Technical Support
      • [Openswan Users] has interfaces= syntax changed in 2.6.18 ?   Paul Wouters
• [Openswan Users] has anyone solved this problem....starting keying attempt 2 of at most 3, but releasing whack   danny dan
  • [Openswan Users] has anyone solved this problem....starting keying attempt 2 of at most 3, but releasing whack   Paul Wouters
• [Openswan Users] upgrade to 2.6.18 and errors in logs   Eray Aslan
  • [Openswan Users] upgrade to 2.6.18 and errors in logs   Paul Wouters
• [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Lawrence Manning
  • [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Paul Wouters
• [Openswan Users] 2 or more virtual interfaces defined to 1 physical interface   Paul Wouters
• [Openswan Users] problem   kian
  • [Openswan Users] problem   Paul Wouters
• [Openswan Users] Fragmentation of ESP Packets on 2.6 linux kernel   Sujithra P
  • [Openswan Users] Fragmentation of ESP Packets on 2.6 linux kernel   Paul Wouters
• [Openswan Users] can you push a route to clients with ipsec/l2tpd setup   Matthew L. Bowman
  • [Openswan Users] can you push a route to clients with ipsec/l2tpd setup   Paul Wouters
• [Openswan Users] Multple IPSEC/L2TP connections from the same NATed device   Valery Vachaev
  • [Openswan Users] Multple IPSEC/L2TP connections from the same NATed device   Mikhail Kononets
• [Openswan Users] How to identify esp traffic with iptables when it is SNATed?   Brad Johnson
• [Openswan Users] Tunnel going down - local or remote?   Anirudh Kamatgi
  • [Openswan Users] Tunnel going down - local or remote?   Peter McGill
  • [Openswan Users] Tunnel going down - local or remote?   Paul Wouters
    • [Openswan Users] Tunnel going down - local or remote?   Anirudh Kamatgi
• [Openswan Users] can you push a route to clients with ipsec/l2tpd setup   Paul Wouters
• [Openswan Users] Openswan crushing on inbound IPSec SA get up   Alexandr Mazukabzov
  • [Openswan Users] Openswan crushing on inbound IPSec SA get up   Paul Wouters
• [Openswan Users] Kernel 2.4.25 KLIPS Compilation error   Thomás
• [Openswan Users] Intermittent issue between Openswan and Sonicwall firewall   Andrew Schwartz
• [Openswan Users] Intermittent issue between Openswan and Sonicwall firewall   Andrew Schwartz
• [Openswan Users] Intermittent issue between Openswan and Sonicwall firewall   Andrew Schwartz
• [Openswan Users] [Announce] xl2tpd 1.2.2 Released   Paul Wouters
• [Openswan Users] Tunnel going down - local or remote?   Anirudh Kamatgi
• [Openswan Users] Where does the l2tp timeout come from?   Kai Garlipp
• [Openswan Users] Who captures IP packets first?   Jianqing Zhang
• [Openswan Users] KLIPS Compilation issue in kernel 2.4   Thomás
  • [Openswan Users] KLIPS Compilation issue in kernel 2.4   Paul Wouters
    • [Openswan Users] KLIPS Compilation issue in kernel 2.4   Thomás
      • [Openswan Users] KLIPS Compilation issue in kernel 2.4   Paul Wouters
• [Openswan Users] Help   Carlos
  • [Openswan Users] Help   Brad Johnson
    • [Openswan Users] Help   Peter McGill
• [Openswan Users] NAT-T inter-op problem with Cisco?   Snitgen, John
• [Openswan Users] Confifure Openswan to ignore rightid   Alexandr Mazukabzov
• [Openswan Users] ipsec connections two clients with the same private ip address   Alfonso Viso
• [Openswan Users] OT: Generating X.509 certs from Windows CA   OCG Technical Support
• [Openswan Users] Who captures IP packets first?   Jianqing Zhang
• [Openswan Users] error while trying to up connection....   Dannysius Naim
• [Openswan Users] INVALID_MESSAGE_ID in the Quick mode with NAT. Why?   yrff_ren
• [Openswan Users] No response (or no acceptable response) to our first IKE message   Dannysius Naim
• [Openswan Users] anyone can help me to explain this log.....   Dannysius Naim
  • [Openswan Users] {Disarmed} RE: {Disarmed} anyone can help me to explain this log.....   scharles
• [Openswan Users] but no connection has been authrized...   Dannysius Naim
• [Openswan Users] anyone can tell me what is problems with my ipsec auto --status   Dannysius Naim
• [Openswan Users] need help..here   Dannysius Naim
• [Openswan Users] need help..here   Alfonso Viso
• [Openswan Users] Netscreen with certificates   Cristiano Monteiro

Last message date: Fri Oct 31 08:44:03 EDT 2008
Archived on: Mon Nov 3 10:31:03 EST 2008

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...