[Openswan Users] anyone can help me to explain this log.....

[Dannysius Naim]

Oct 30 18:54:05 vpnserver pluto[20378]: "roadwarrior" #1: initiating Main
Mode
Oct 30 18:55:15 vpnserver pluto[20378]: "roadwarrior" #1: max number of
retransmissions (2) reached STATE_MAIN_I1.  No response (or no acceptable
response) to our first IKE message
Oct 30 18:55:15 vpnserver pluto[20378]: "roadwarrior" #1: starting keying
attempt 2 of at most 3, but releasing whack
Oct 30 18:55:15 vpnserver pluto[20378]: "roadwarrior" #2: initiating Main
Mode to replace #1
Oct 30 18:55:20 vpnserver pluto[20378]: packet from 219.93.36.194:31764:
received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Oct 30 18:55:20 vpnserver pluto[20378]: packet from 219.93.36.194:31764:
received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] method set
to=106
Oct 30 18:55:20 vpnserver pluto[20378]: packet from 219.93.36.194:31764:
received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] method set to=108

Oct 30 18:55:20 vpnserver pluto[20378]: packet from 219.93.36.194:31764:
received Vendor ID payload [RFC 3947] method set to=110
Oct 30 18:55:20 vpnserver pluto[20378]: packet from 219.93.36.194:31764:
received Vendor ID payload [Dead Peer Detection]
Oct 30 18:55:20 vpnserver pluto[20378]: packet from 219.93.36.194:31764:
initial Aggressive Mode message from 219.93.36.194 but no (wildcard)
connection has been configured
Oct 30 18:56:25 vpnserver pluto[20378]: "roadwarrior" #2: max number of
retransmissions (2) reached STATE_MAIN_I1.  No response (or no acceptable
response) to our first IKE message
Oct 30 18:56:25 vpnserver pluto[20378]: "roadwarrior" #2: starting keying
attempt 3 of at most 3
Oct 30 18:56:25 vpnserver pluto[20378]: "roadwarrior" #3: initiating Main
Mode to replace #2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20081030/50adb700/attachment.html