[Openswan Users] Ports used by Openswan and enable internet browing from clients

[Mateen Fugawala]

How do I get my clients to the internet when connected to the VPN? I believe
that is disabled by default? 

-----Original Message-----
From: Paul Wouters [mailto:paul at xelerance.com] 
Sent: Monday, January 24, 2011 8:10 PM
To: Willie Gillespie
Cc: Mateen Fugawala; users at openswan.org
Subject: Re: [Openswan Users] Ports used by Openswan and enable internet
browing from clients

On Mon, 24 Jan 2011, Willie Gillespie wrote:

> UDP/IP port 500 for ISAKMP
> UDP/IP port 4500 for NAT-T

Note, this means connecting from ANY high port to your port udp 4500, and
from your udp 4500 to ANY high port.

> ESP/IP [also known as IP protocol 50]
> AH/IP (if you are using it) [also known as IP protocol 51]
>
> UDP/IP port 1701 is used for L2TP

Paul