[Openswan Users] Creating a Fedora kernel RPM with KLIPS support

[sasa]

..thank for your aid but I made reference to the document written from  Tim 
Larsen in order creating a kernel rpm files.

------
Salvatore.


----- Original Message ----- 
From: "ted leslie" <tleslie at tcn.net>
To: <users at openswan.org>
Sent: Thursday, April 27, 2006 10:41 PM
Subject: Re: [Openswan Users] Creating a Fedora kernel RPM with KLIPS 
support


>I use a different environment they you do,
>
> i just apply the patch to the kernel tree
>
> i then make menuconfig and set my options
> and then
> make
>
> you are running a script to push module ops into the .config
> and if the module ops don't match what you have in the kernel,
> its going to complain when you finish the make xconfig (or make 
> menuconfig)
>
> the
>> IPSEC NAT-Traversal (KLIPS compatible)
>> The Openswan IPsec (KLIPS26)
>> KLIPS options
> you reported does seem a bit to formatted, i.e. when i finish a make 
> menuconfig,
> it gives me a line by line report warning me of module/symbol mis matches,
> which i assume is what you have above?
>
> it still just seems to me that you are configuring module attributes in 
> your .config
> that are not actually valid for the state your kernel is in.
>
> if you have mucked up your kernel (sort of got the make out of sync)
> you have to do a
> make mrproper
> this will pristine your kernel tree, but this may not help you.
>
> i think you need help from someone using the redhat and yum environment 
> ...
> i don't
>
> but again the steps shuold be simple
>
> get the openswan and  nat-t and klips packages for your particular kernel 
> from the openswan site.
> apply the patches to the kernel tree, and they should report back 100% 
> sucessful.
> Then make menuconfig (or make xconfig) on that kernel and select the 
> options you want,
> i don't echo in the options as you showed in your script, i just identify 
> what i want
> in the menu of the kernel, i..e turn on a certain encrypt options (as a 
> module), etc.
>
> then make the kernel
>
> so i guess you could call this the fully manual way.
>
> -tl
>
>
> On Thu, 27 Apr 2006 20:45:47 +0200
> "sasa" <sasa at shoponweb.it> wrote:
>
>> Hi, thaks for your document but I have followed steps but when run 'make
>> xconfig' I don't have:
>>
>> IPSEC NAT-Traversal (KLIPS compatible)
>> The Openswan IPsec (KLIPS26)
>> KLIPS options
>>
>> ??
>> thanks.
>>
>> ------
>> Salvatore.
>>
>> ----- Original Message ----- 
>> From: "Tim Larsen" <tim.larsen at smoothwall.net>
>> To: <users at openswan.org>
>> Sent: Thursday, April 27, 2006 5:22 PM
>> Subject: [Openswan Users] Creating a Fedora kernel RPM with KLIPS support
>>
>>
>> > _______________________________________________
>> > Users at openswan.org
>> > http://lists.openswan.org/mailman/listinfo/users
>> > Building and Integrating Virtual Private Networks with Openswan:
>> > http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>> >
>>
>> _______________________________________________
>> Users at openswan.org
>> http://lists.openswan.org/mailman/listinfo/users
>> Building and Integrating Virtual Private Networks with Openswan:
>> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>>
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>