[Openswan Users] stuck at STATE_QUICK_I1

[Pierre de France]

Thank you very much Paul,

The previous post by Andy solved my issue and the connection is now up.


Pierre.



> -----Message d'origine-----
> De : Paul Wouters [mailto:paul at xelerance.com]
> Envoyé : mardi 13 septembre 2005 17:24
> À : Pierre de France
> Cc : users at openswan.org
> Objet : Re: RE : [Openswan Users] stuck at STATE_QUICK_I1
> 
> On Tue, 13 Sep 2005, Pierre de France wrote:
> 
> > I tried to add leftnexthop and rightnexthop but unfortunately
nothing
> > changed. I still get the same error.
> > I thought the " up-host command exited with status 139" message was
due
> > to a too restrictive firewall that doesn't accept ping.
> 
> Try to disable the firewall for a few minutes and see if that is
indeed
> the case.
> 
> >        ike=3des-md5-modp1536,3des-md5-modp1024!
> >        esp=3des-md5!
> 
> what version of openswan is this? Openswan-2 does not use "!" to imply
> strict mode. Instead, specifying anything automatically means "strict
> mode".
> 
> > Any other ideas ?
> 
> No. Perhaps posting an 'ipsec barf' will shed some light on the
problem?
> 
> Paul