[Openswan Users] IKE interoperability between Windows and Linux(help)

[Vikas sarawat]

Hello,
I am trying to bring up IPSec (using IKE) using 3DES and SHA1 ( both phase 1 
and 20 between Windows and Linux. I am able to bring the IPSec association 
up with configuration below when Windows is the ike phase 1 and 2 initiator, 
however IpSec association don't come up if Linux initiates the IKE. When 
Linux initiates the IKE phase 1 and 2, the negotiation hangs at phase2. I 
was wondering if you guys have seen this problem and provide help with this.
############ipsec.conf################
flush;
spdflush;
spdadd 10.32.32.244 10.32.0.127 any -P out ipsec
esp/transport//require;
spdadd 10.32.0.127 10.32.32.244 any -P in ipsec
esp/transport//require;
#############################

##############racoon.conf#############
path pre_shared_key "/etc/racoon/psk.txt";
# path certificate "/etc/racoon/certs";

log debug4;

padding {
        strict_check off;
}

timer {
        counter 5;
        interval 20 sec;
        phase1 30 sec;
        phase2 15 sec;
}

remote 10.32.0.127 {
        exchange_mode  main;
        my_identifier address;
        proposal_check obey;
        lifetime time 360 seconds;
        #doi ipsec_doi;
        proposal {
                encryption_algorithm 3des;
                hash_algorithm sha1;
                authentication_method pre_shared_key;
                dh_group 1 ;
        }
}

sainfo anonymous
{
        pfs_group 2;
        lifetime time 300 seconds ;
        encryption_algorithm 3des ;
        authentication_algorithm  hmac_sha1 ;
        compression_algorithm deflate ;
}
################################

Thanks,
Vikas