[Openswan Users] AUTHENTICATION_FAILED trying to connect to BinTec Gateway

[Frank.Mayer at knapp-systems.com]

Hello,

I'm trying to connect to a BinTec Router.This is what I get:

#449631: initiating Main Mode
#449631: STATE_MAIN_I1: initiate
#449631: ignoring Vendor ID payload [0048e2270bea8395ed778d343cc2a076]
#449631: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
#449631: STATE_MAIN_I2: sent MI2, expecting MR2
#449631: ignoring informational payload, type AUTHENTICATION_FAILED
#449631: received and ignored informational message
#449631: STATE_MAIN_I2: retransmission; will wait 20s for response
#449631: ignoring informational payload, type AUTHENTICATION_FAILED
#449631: received and ignored informational message

In the Log of the BinTec Router, there's nothing much helpful.

This is the donnection descriprion:
conn xxyy
        type=tunnel
        right=x.x.x.x
        rightid=x.x.x.x
        rightsubnet=x.x.0.0/16
        left=x.x.x.x
        leftid=x.x.x.x
        leftsubnet=x.x.0.0/16
        leftnexthop=x.x.x.x
        authby=secret
        ike=3des-md5-modp1024
        ikelifetime=1800s
        keylife=30m
        compress=no
        pfs=no
        auth=esp
        keyexchange=ike
        auto=start
        esp=3des-md5-1024

x.x.x.x stands for the respective IP-addresses and -networks, 
and yes: the'yre defined correctly (did double check that beforehand)

Can anyone give me a hint on how to proceed?

Thanks in advance,
Frank Mayer
UNIX Systemadministration
----------------------------------------------------
KNAPP Systemintegration GmbH
Waltenbachstrasse 9
8700 Leoben, Austria
----------------------------------------------------
Phone: +43 3842 805-921
Fax: +43 3842 82930-921
frank.mayer at knapp-systems.com
www.knapp.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20050411/be03baca/attachment.htm