[Openswan Users] Xauth client on 2.1.5

[Jiva DeVoe]

Please ignore this, I got it working on 2.1.5. :)

On 9/1/04 4:12 PM, "Jiva DeVoe" <jiva at ixiacom.com> wrote:

> So I'm messing around with xauth client on 2.1.5, and I'm getting the
> following error msgs:
> 
> 003 "Connection0" #2: ERROR: netlink XFRM_MSG_NEWPOLICY response for flow
> tun.0 at 40.0.0.110 included errno 17: File exists
> 
> The full output of whack --initiate is below.  My question is - I know xauth
> client is broken in 2.2.x... Does it work in 2.1.x?  What would be causing
> this error?  Here's what I am passing as my configuration via whack:
> 
> whack --name Connection0 --tunnel --updown /bin/_updown --client
> 40.0.0.10/32 --host 40.0.0.10 --xauthclient --to --updown /bin/_updown
> --client 40.0.0.110/32 --host 40.0.0.110 --psk --encrypt --route
> --xauthserver 
> 
> And here's the full output of initiate...
> 
> 
> 106 "Connection0" #1: STATE_MAIN_I2: sent MI2, expecting MR2
> 002 "Connection0" #1: transition from state STATE_MAIN_I2 to state
> STATE_MAIN_I3
> 108 "Connection0" #1: STATE_MAIN_I3: sent MI3, expecting MR3
> 002 "Connection0" #1: Peer ID is ID_IPV4_ADDR: '40.0.0.110'
> 002 "Connection0" #1: transition from state STATE_MAIN_I3 to state
> STATE_MAIN_I4
> 002 "Connection0" #1: ISAKMP SA established
> 004 "Connection0" #1: STATE_MAIN_I4: ISAKMP SA established
> 041 "Connection0" #1: Connection0 prompt for Username:
> 040 "Connection0" #1: Connection0 prompt for Password:
> 002 "Connection0" #1: answering XAUTH challenge with user='abcd'
> 002 "Connection0" #1: transition from state STATE_MAIN_I4 to state
> STATE_XAUTH_I1
> 002 "Connection0" #1: XAUTH client - awaiting CFG_set
> 004 "Connection0" #1: STATE_XAUTH_I1: XAUTH client - awaiting CFG_set
> 002 "Connection0" #1: successfully logged in
> 002 "Connection0" #1: transition from state STATE_XAUTH_I1 to state
> STATE_XAUTH_I1
> 002 "Connection0" #1: XAUTH client - awaiting CFG_set
> 004 "Connection0" #1: STATE_XAUTH_I1: XAUTH client - awaiting CFG_set
> 002 "Connection0" #2: initiating Quick Mode PSK+ENCRYPT+TUNNEL+UP {using
> isakmp#1}
> 112 "Connection0" #2: STATE_QUICK_I1: initiate
> 003 "Connection0" #2: ERROR: netlink XFRM_MSG_NEWPOLICY response for flow
> tun.0 at 40.0.0.110 included errno 17: File exists
> 032 "Connection0" #2: STATE_QUICK_I1: internal error
> 003 "Connection0" #2: ERROR: netlink response for Add SA
> esp.6988b77e at 40.0.0.10 included errno 3: No such process
> 
> _______________________________________________
> Users mailing list
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
>