[Openswan Users] Routing Table Question

[Bonnie BM]

Hie guys

I have setup CentOS 6.5 with OpenSwan connecting to a CISCO ASA 5505. 
the VPN comes up, and the person at the ASA side is confirming that its 
UP, but in my routing table the ipsec interface is not showing.

pings are not being replied.
need to connect network 10.10.10.0/30 to network 192.168.101.218 and 
192.168.101.194. my Default gateway is x.x.x.x . is it supposed to be 
also the gateway for my VPN links in the routing table?

route -n

Kernel IP routing table
Destination          Gateway         Genmask         Flags Metric Ref    
Use Iface
192.168.101.218 x.x.x.x  255.255.255.255 UGH   0      0        0 eth1
192.168.101.194 x.x.x.x  255.255.255.255 UGH   0      0        0 eth1
23.x.x.x             0.0.0.0         255.255.255.252 U     0 0        0 
eth1
10.10.10.0          0.0.0.0         255.255.255.252 U     0 0 0 eth1
169.254.0.0       0.0.0.0         255.255.0.0         U     1003 
0        0 eth1
0.0.0.0              x.x.x.x           0.0.0.0 UG    0      0 0 eth1

so the IPs are there in the routing table, but from there nothing happens,


any ideas?