[Openswan Users] NO_PROPOSAL_CHOSEN error while connecting
Simon Deziel
simon at xelerance.com
Mon Apr 15 21:53:11 UTC 2013
Hi Slava,
On 13-04-15 10:59 AM, Viacheslav Dushin wrote:
> Hi, I'm trying to create site-to-site connection
>
>
> My provider sent me the following settings:
>
>>VPN server address – 2.2.2.2
>>Client subnet 10.128.139.0/24 <http://10.128.139.0/24>
>>Destiantion subnet - 10.128.0.0/24 <http://10.128.0.0/24>
>>PSK: – XXXXXXXXX
>>VPN mode: – tunnel, PSK, 3DES encryption, hash: SHA1, UDP encapsulation
UDP encapsulation means you should enable nat_traversal and might also
need to use "forceencaps=yes" for the connection. You might also need to
disable PFS but this should be confirmed with the remote side.
HTH,
Simon
> I configured it accordingly, but it doesn't want to connect:
>
> It fails with "NO_PROPOSAL_CHOSEN"
>
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: transition from state
> STATE_MAIN_I3 to state STATE_MAIN_I4
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: STATE_MAIN_I4: ISAKMP
> SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192
> prf=oakley_sha group=modp1024}
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #2: initiating Quick Mode
> PSK+ENCRYPT+TUNNEL+PFS+UP+IKEv2ALLOW+SAREFTRACK {using isakmp#1
> msgid:cccf4cf7 proposal=3DES(3)_192-SHA1(2)_160
> pfsgroup=OAKLEY_GROUP_MODP1024}
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: ignoring
> informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: received and ignored
> informational message
>
>
> Openswan version: Linux Openswan U2.6.38/K3.1.0-1.2-xen (netkey)
>
>
> 1.1.1.123 is my local address
> 1.1.1.1 is my default gateway
> 2.2.2.2 is remote server address
>
>
> Thanks, Slava
>
>
> See all logs and configs below:
>
>
> ipsec.conf start
>
>
> # /etc/ipsec.conf - Openswan IPsec configuration file
>
> # This file: /usr/share/doc/openswan/ipsec.conf-sample
> #
> # Manual: ipsec.conf.5
>
>
> version2.0# conforms to second version of ipsec.conf specification
>
> # basic configuration
> config setup
> #interfaces="%defaultroute"
> # Do not set debug options to debug configuration issues!
> # plutodebug / klipsdebug = "all", "none" or a combation from below:
> # "raw crypt parsing emitting control klips pfkey natt x509 dpd private"
> # eg:
> # plutodebug="control parsing"
> # Again: only enable plutodebug or klipsdebug when asked by a developer
> #
> # enable to get logs per-peer
> # plutoopts="--perpeerlog"
> #
> # Enable core dumps (might require system changes, like ulimit -C)
> # This is required for abrtd to work properly
> # Note: incorrect SElinux policies might prevent pluto writing the core
> dumpdir=/var/run/pluto/
> #
> # NAT-TRAVERSAL support, see README.NAT-Traversal
> nat_traversal=no
> # exclude networks used on server side by adding %v4:!a.b.c.0/24
> # It seems that T-Mobile in the US and Rogers/Fido in Canada are
> # using 25/8 as "private" address space on their 3G network.
> # This range has not been announced via BGP (at least upto 2010-12-21)
> virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10
> <http://10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10>
> # OE is now off by default. Uncomment and change to on, to enable.
> oe=off
> # which IPsec stack to use. auto will try netkey, then klips then mast
> protostack=netkey
> # Use this to log to a file, or disable logging on embedded systems
> (like openwrt)
> #plutostderrlog=/dev/null
>
>
> # Add connections here
>
> # sample VPN connection
> # for more examples, see /etc/ipsec.d/examples/
> #conn sample
> ## Left security gateway, subnet behind it, nexthop toward right.
> #left=10.0.0.1
> #leftsubnet=172.16.0.0/24 <http://172.16.0.0/24>
> #leftnexthop=10.22.33.44
> ## Right security gateway, subnet behind it, nexthop toward left.
> #right=10.12.12.1
> #rightsubnet=192.168.0.0/24 <http://192.168.0.0/24>
> #rightnexthop=10.101.102.103
> ## To authorize this connection, but not actually start it,
> ## at startup, uncomment this.
> ##auto=add
>
>
> conn telphin
> left=1.1.1.123 # left for local
> leftsubnet=10.128.139.0/24 <http://10.128.139.0/24>
> leftnexthop=%defaultroute
> right=2.2.2.2 # right for remote
> rightsubnet=10.128.0.0/24 <http://10.128.0.0/24>
> rightnexthop=%defaultroute
> type=tunnel
> authby=secret
> auto=start
> auth=esp
> keyexchange=ike
> ike=3des-sha1-modp1024!
> esp=3des-sha1!
> pfs=yes
>
> ipsec.conf end
>
>
> status start
>
> ipsec auto --status
> 000 using kernel interface: netkey
> 000 interface lo/lo ::1
> 000 interface lo/lo 127.0.0.1
> 000 interface eth0/eth0 1.1.1.123
> 000 interface tun0/tun0 10.128.139.1
> 000 %myid = (none)
> 000 debug none
> 000
> 000 virtual_private (%priv):
> 000 - allowed 6 subnets: 10.0.0.0/8 <http://10.0.0.0/8>, 192.168.0.0/16
> <http://192.168.0.0/16>, 172.16.0.0/12 <http://172.16.0.0/12>,
> 25.0.0.0/8 <http://25.0.0.0/8>, fd00::/8, fe80::/10
> 000 - disallowed 0 subnets:
> 000 WARNING: Disallowed subnets in virtual_private= is empty. If you have
> 000 private address space in internal use, it should be excluded!
> 000
> 000 algorithm ESP encrypt: id=2, name=ESP_DES, ivlen=8, keysizemin=64,
> keysizemax=64
> 000 algorithm ESP encrypt: id=3, name=ESP_3DES, ivlen=8, keysizemin=192,
> keysizemax=192
> 000 algorithm ESP encrypt: id=6, name=ESP_CAST, ivlen=8, keysizemin=40,
> keysizemax=128
> 000 algorithm ESP encrypt: id=7, name=ESP_BLOWFISH, ivlen=8,
> keysizemin=40, keysizemax=448
> 000 algorithm ESP encrypt: id=11, name=ESP_NULL, ivlen=0, keysizemin=0,
> keysizemax=0
> 000 algorithm ESP encrypt: id=12, name=ESP_AES, ivlen=8, keysizemin=128,
> keysizemax=256
> 000 algorithm ESP encrypt: id=13, name=ESP_AES_CTR, ivlen=8,
> keysizemin=160, keysizemax=288
> 000 algorithm ESP encrypt: id=14, name=ESP_AES_CCM_A, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=15, name=ESP_AES_CCM_B, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=16, name=ESP_AES_CCM_C, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=18, name=ESP_AES_GCM_A, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=19, name=ESP_AES_GCM_B, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=20, name=ESP_AES_GCM_C, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=22, name=ESP_CAMELLIA, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=252, name=ESP_SERPENT, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP encrypt: id=253, name=ESP_TWOFISH, ivlen=8,
> keysizemin=128, keysizemax=256
> 000 algorithm ESP auth attr: id=1, name=AUTH_ALGORITHM_HMAC_MD5,
> keysizemin=128, keysizemax=128
> 000 algorithm ESP auth attr: id=2, name=AUTH_ALGORITHM_HMAC_SHA1,
> keysizemin=160, keysizemax=160
> 000 algorithm ESP auth attr: id=5, name=AUTH_ALGORITHM_HMAC_SHA2_256,
> keysizemin=256, keysizemax=256
> 000 algorithm ESP auth attr: id=6, name=AUTH_ALGORITHM_HMAC_SHA2_384,
> keysizemin=384, keysizemax=384
> 000 algorithm ESP auth attr: id=7, name=AUTH_ALGORITHM_HMAC_SHA2_512,
> keysizemin=512, keysizemax=512
> 000 algorithm ESP auth attr: id=8, name=AUTH_ALGORITHM_HMAC_RIPEMD,
> keysizemin=160, keysizemax=160
> 000 algorithm ESP auth attr: id=9, name=AUTH_ALGORITHM_AES_CBC,
> keysizemin=128, keysizemax=128
> 000 algorithm ESP auth attr: id=251, name=AUTH_ALGORITHM_NULL_KAME,
> keysizemin=0, keysizemax=0
> 000
> 000 algorithm IKE encrypt: id=0, name=(null), blocksize=16, keydeflen=131
> 000 algorithm IKE encrypt: id=5, name=OAKLEY_3DES_CBC, blocksize=8,
> keydeflen=192
> 000 algorithm IKE encrypt: id=7, name=OAKLEY_AES_CBC, blocksize=16,
> keydeflen=128
> 000 algorithm IKE hash: id=1, name=OAKLEY_MD5, hashsize=16
> 000 algorithm IKE hash: id=2, name=OAKLEY_SHA1, hashsize=20
> 000 algorithm IKE hash: id=4, name=OAKLEY_SHA2_256, hashsize=32
> 000 algorithm IKE hash: id=6, name=OAKLEY_SHA2_512, hashsize=64
> 000 algorithm IKE dh group: id=2, name=OAKLEY_GROUP_MODP1024, bits=1024
> 000 algorithm IKE dh group: id=5, name=OAKLEY_GROUP_MODP1536, bits=1536
> 000 algorithm IKE dh group: id=14, name=OAKLEY_GROUP_MODP2048, bits=2048
> 000 algorithm IKE dh group: id=15, name=OAKLEY_GROUP_MODP3072, bits=3072
> 000 algorithm IKE dh group: id=16, name=OAKLEY_GROUP_MODP4096, bits=4096
> 000 algorithm IKE dh group: id=17, name=OAKLEY_GROUP_MODP6144, bits=6144
> 000 algorithm IKE dh group: id=18, name=OAKLEY_GROUP_MODP8192, bits=8192
> 000 algorithm IKE dh group: id=22, name=OAKLEY_GROUP_DH22, bits=1024
> 000 algorithm IKE dh group: id=23, name=OAKLEY_GROUP_DH23, bits=2048
> 000 algorithm IKE dh group: id=24, name=OAKLEY_GROUP_DH24, bits=2048
> 000
> 000 stats db_ops: {curr_cnt, total_cnt, maxsz} :context={0,2,36}
> trans={0,2,1536} attrs={0,2,2048}
> 000
> 000 "telphin": 10.128.139.0/24===1.1.1.123
> <http://10.128.139.0/24===1.1.1.123><1.1.1.123>---1.1.1.1...1.1.1.1---2.2.2.2<2.2.2.2>===10.128.0.0/24
> <http://10.128.0.0/24>; prospective erouted; eroute owner: #0
> 000 "telphin": myip=unset; hisip=unset;
> 000 "telphin": ike_life: 3600s; ipsec_life: 28800s; rekey_margin:
> 540s; rekey_fuzz: 100%; keyingtries: 0
> 000 "telphin": policy:
> PSK+ENCRYPT+TUNNEL+PFS+UP+IKEv2ALLOW+SAREFTRACK+lKOD+rKOD; prio: 24,24;
> interface: eth0;
> 000 "telphin": newest ISAKMP SA: #1; newest IPsec SA: #0;
> 000 "telphin": IKE algorithms wanted:
> 3DES_CBC(5)_000-SHA1(2)_000-MODP1024(2); flags=strict
> 000 "telphin": IKE algorithms found:
> 3DES_CBC(5)_192-SHA1(2)_160-MODP1024(2)
> 000 "telphin": IKE algorithm newest: 3DES_CBC_192-SHA1-MODP1024
> 000 "telphin": ESP algorithms wanted: 3DES(3)_000-SHA1(2)_000;
> flags=strict
> 000 "telphin": ESP algorithms loaded: 3DES(3)_192-SHA1(2)_160
> 000
> 000 #2: "telphin":500 STATE_QUICK_I1 (sent QI1, expecting QR1);
> EVENT_RETRANSMIT in 33s; lastdpd=-1s(seq in:0 out:0); idle; import:admin
> initiate
> 000 #1: "telphin":500 STATE_MAIN_I4 (ISAKMP SA established);
> EVENT_SA_REPLACE in 2792s; newest ISAKMP; lastdpd=-1s(seq in:0 out:0);
> idle; import:admin initiate
> 000
>
> status end
>
>
> log file start
>
> Apr 15 18:34:38 vm12202 ipsec__plutorun: Starting Pluto subsystem...
> Apr 15 18:34:38 vm12202 pluto[4039]: Starting Pluto (Openswan Version
> 2.6.38; Vendor ID OEvy\134kgzWq\134s) pid:4039
> Apr 15 18:34:38 vm12202 pluto[4039]: LEAK_DETECTIVE support [disabled]
> Apr 15 18:34:38 vm12202 pluto[4039]: OCF support for IKE [disabled]
> Apr 15 18:34:38 vm12202 pluto[4039]: SAref support [disabled]: Protocol
> not available
> Apr 15 18:34:38 vm12202 pluto[4039]: SAbind support [disabled]: Protocol
> not available
> Apr 15 18:34:38 vm12202 pluto[4039]: NSS support [disabled]
> Apr 15 18:34:38 vm12202 pluto[4039]: HAVE_STATSD notification support
> not compiled in
> Apr 15 18:34:38 vm12202 pluto[4039]: Setting NAT-Traversal port-4500
> floating to off
> Apr 15 18:34:38 vm12202 pluto[4039]: port floating activation
> criteria nat_t=0/port_float=1
> Apr 15 18:34:38 vm12202 pluto[4039]: NAT-Traversal support [disabled]
> Apr 15 18:34:38 vm12202 pluto[4039]: using /dev/urandom as source of
> random entropy
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> OAKLEY_AES_CBC: Ok (ret=0)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_hash(): Activating
> OAKLEY_SHA2_512: Ok (ret=0)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_hash(): Activating
> OAKLEY_SHA2_256: Ok (ret=0)
> Apr 15 18:34:38 vm12202 pluto[4039]: starting up 1 cryptographic helpers
> Apr 15 18:34:38 vm12202 pluto[4039]: started helper pid=4041 (fd:6)
> Apr 15 18:34:38 vm12202 pluto[4039]: Using Linux 2.6 IPsec interface
> code on 3.1.0-1.2-xen (experimental code)
> Apr 15 18:34:38 vm12202 pluto[4041]: using /dev/urandom as source of
> random entropy
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> aes_ccm_8: Ok (ret=0)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_add(): ERROR: algo_type
> '0', algo_id '0', Algorithm type already exists
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> aes_ccm_12: FAILED (ret=-17)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_add(): ERROR: algo_type
> '0', algo_id '0', Algorithm type already exists
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> aes_ccm_16: FAILED (ret=-17)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_add(): ERROR: algo_type
> '0', algo_id '0', Algorithm type already exists
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> aes_gcm_8: FAILED (ret=-17)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_add(): ERROR: algo_type
> '0', algo_id '0', Algorithm type already exists
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> aes_gcm_12: FAILED (ret=-17)
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_add(): ERROR: algo_type
> '0', algo_id '0', Algorithm type already exists
> Apr 15 18:34:38 vm12202 pluto[4039]: ike_alg_register_enc(): Activating
> aes_gcm_16: FAILED (ret=-17)
> Apr 15 18:34:38 vm12202 pluto[4039]: added connection description "telphin"
> Apr 15 18:34:38 vm12202 pluto[4039]: listening for IKE messages
> Apr 15 18:34:38 vm12202 pluto[4039]: adding interface tun0/tun0
> 10.128.139.1:500 <http://10.128.139.1:500>
> Apr 15 18:34:38 vm12202 pluto[4039]: adding interface eth0/eth0
> 1.1.1.123:500 <http://1.1.1.123:500>
> Apr 15 18:34:38 vm12202 pluto[4039]: adding interface lo/lo
> 127.0.0.1:500 <http://127.0.0.1:500>
> Apr 15 18:34:38 vm12202 pluto[4039]: adding interface lo/lo ::1:500
> Apr 15 18:34:38 vm12202 pluto[4039]: loading secrets from
> "/etc/ipsec.secrets"
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: initiating Main Mode
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: transition from state
> STATE_MAIN_I1 to state STATE_MAIN_I2
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: STATE_MAIN_I2: sent
> MI2, expecting MR2
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: received Vendor ID
> payload [Cisco-Unity]
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: received Vendor ID
> payload [Dead Peer Detection]
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: ignoring unknown
> Vendor ID payload [24f71717df62d1ed92fbaa8e988a9af6]
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: received Vendor ID
> payload [XAUTH]
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: transition from state
> STATE_MAIN_I2 to state STATE_MAIN_I3
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: STATE_MAIN_I3: sent
> MI3, expecting MR3
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: Main mode peer ID is
> ID_IPV4_ADDR: '2.2.2.2'
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: transition from state
> STATE_MAIN_I3 to state STATE_MAIN_I4
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: STATE_MAIN_I4: ISAKMP
> SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192
> prf=oakley_sha group=modp1024}
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #2: initiating Quick Mode
> PSK+ENCRYPT+TUNNEL+PFS+UP+IKEv2ALLOW+SAREFTRACK {using isakmp#1
> msgid:cccf4cf7 proposal=3DES(3)_192-SHA1(2)_160
> pfsgroup=OAKLEY_GROUP_MODP1024}
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: ignoring
> informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000
> Apr 15 18:34:38 vm12202 pluto[4039]: "telphin" #1: received and ignored
> informational message
>
> log file end
>
>
> _______________________________________________
> Users at lists.openswan.org
> https://lists.openswan.org/mailman/listinfo/users
> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>
More information about the Users
mailing list