[Openswan Users] Asynchronous network error w/ Android 2.3 and NAT on both sides

Willie Gillespie wgillespie+openswan at es2eng.com
Tue Feb 21 18:23:51 EST 2012


On 2/21/2012 12:53 PM, Corrado Primier wrote:
> "l2tp"[1] CLIENTIP #2: STATE_QUICK_R2: IPsec SA established transport
> mode {ESP/NAT=>0x0d091c69<0xcc54391c xfrm=3DES_0-HMAC_SHA1 NATOA=none
> NATD=CLIENTIP:4500 DPD=none}

IPsec is connecting properly.  Perhaps the problem is that you have your 
xl2tpd with a local ip of 192.168.42.3, where the IPsec connection is 
only 192.168.4.2 (UDP port 1701).

I'm assuming that Openswan and xl2tpd are running on the same box, so 
what happens if you set local ip to match?

Or maybe check the xl2tpd/ppp debug logs at this stage.


More information about the Users mailing list