[Openswan Users] Openswan and Cisco VPN 3000 Series

[l1101100]

Hello list;

I am not able to setup a tunnel between Openswan and Cisco VPN 3000 Series
with these options:

*PHASE1 (ISAKMP)*
Encryption algorithm          : AES256
Hash algorithm                : Secure Hash Standard
Authentication method         : Pre-Shared Key
Diffie-Hellman group          : #2 (1024 bit)
Lifetime                      : 86400 seconds, no volume limit

*PHASE2 (IPSEC)*
Encryption algorithm          : AES256
Hash algorithm                : Secure Hash Standard
Security association lifetime : 3600 seconds
PFS                           : No

debian:~# *ipsec barf* -> *http://codepad.org/p8LgcEr4*

My *leftsubnet *is on the same machine (server with openswan)
as virtual interface (eth0:1), and I am not sure if this is really possible
to setup ?!

eth0:1        ===eth0
---xx.xxx.68.241...yy.yyy.112.1===yy.yyy.112.0/24

172.16.26.0/24===xx.xxx.68.246---xx.xxx.68.241...yy.yyy.112.1===yy.yyy.112.0/24

Any advice?

--
haver
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20100503/f0a2bc75/attachment.html