[Openswan Users] Kernel Error was:[Re: Kernel-2.6.27 and nat-t patch]

[Paul Wouters]

On Fri, 26 Jun 2009, Sasa wrote:

> Hi, I have find on web there is bug with Debian 
> (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=522112) but I haven't find 
> a solution for this problem (I use fedora core 10 with kernel 2.6.27).

compiling openswan 2.6.22 should work on any kernel upto 2.6.30. It will
probably take some time to get it to work on 2.6.31, due to massive API
changes http://patchwork.ozlabs.org/patch/27566/

Paul

>
> ------
>
>  Salvatore.
>
>
>
> ----- Original Message ----- From: "Sasa" <sasa at shoponweb.it>
> To: "Paul Wouters" <paul at xelerance.com>
> Cc: <users at openswan.org>
> Sent: Wednesday, June 24, 2009 5:29 PM
> Subject: Re: [Openswan Users] Kernel-2.6.27 and nat-t patch
>
>
>> Hi, I have applied nat-t patch again but I have a new error when I try to
>> kernel compile.
>> My steps are:
>> 
>> #rpm2cpio kernel-2.6.27.24-170.2.68.fc10.src.rpm | cpio -iv
>> kernel-2.6.27-i686.config
>> #cd linux-2.6.27.24/
>> #make oldconfig
>> #make && make modules_install
>> #cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.27.24-custom
>> #cp System.map /boot/System.map-2.6.27.24-custom
>> #cp .config /boot/config-2.6.27.24-custom
>> #mkinitrd /boot/initrd-2.6.27.24-custom.img 2.6.27.24
>> #cd /root/linux-2.6.27.24
>> #patch -p1<../openswan-2.4.x.kernel-2.6.23-natt.patch
>> #patch -p1<../openswan-2.4.13.kernel-2.6-klips.patch
>> #make mrproper
>> #make xconfig (Load di config-2.6.27.24-custom)
>> ---> I have loaded Openswan IPSEC (Klips26)
>> #make oldconfig
>> #make && make modules_install
>> 
>> ..but I have this error:
>> 
>> LD      net/ipsec/built-in.o
>>  CC [M]  net/ipsec/ipsec_init.o
>> In file included from net/ipsec/ipsec_init.c:86:
>> include/openswan/ipsec_esp.h:52: error: expected specifier-qualifier-list
>> before 'des_key_schedule'
>> make[2]: *** [net/ipsec/ipsec_init.o] Error 1
>> make[1]: *** [net/ipsec] Error 2
>> make: *** [net] Error 2
>> 
>> Thanks.
>> 
>> ------
>>
>>   Salvatore.
>> 
>> 
>> ----- Original Message ----- From: "Paul Wouters" <paul at xelerance.com>
>> To: "Sasa" <sasa at shoponweb.it>
>> Cc: <users at openswan.org>
>> Sent: Tuesday, June 23, 2009 7:03 PM
>> Subject: Re: [Openswan Users] Kernel-2.6.27 and nat-t patch
>> 
>> 
>>> On Tue, 23 Jun 2009, Sasa wrote:
>>> 
>>>> ..with openswan-2.4.x.kernel-2.6.23-natt.patch I have this result:
>>> 
>>>> The next patch would create the file include/net/xfrmudp.h,
>>>> which already exists!  Assume -R? [n] n
>>> 
>>> You can't patch ontop of a failed patch. Use a clean tree.
>>> 
>>> Paul
>>> 
>> 
>> _______________________________________________
>> Users at openswan.org
>> http://lists.openswan.org/mailman/listinfo/users
>> Building and Integrating Virtual Private Networks with Openswan:
>> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>> 
>