[Openswan Users] Kernel Error was:[Re: Kernel-2.6.27 and nat-t patch]

[Sasa]

Hi, I have find on web there is bug with Debian 
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=522112) but I haven't find 
a solution for this problem (I use fedora core 10 with kernel 2.6.27).
Thanks.

------

   Salvatore.



----- Original Message ----- 
From: "Sasa" <sasa at shoponweb.it>
To: "Paul Wouters" <paul at xelerance.com>
Cc: <users at openswan.org>
Sent: Wednesday, June 24, 2009 5:29 PM
Subject: Re: [Openswan Users] Kernel-2.6.27 and nat-t patch


> Hi, I have applied nat-t patch again but I have a new error when I try to
> kernel compile.
> My steps are:
>
> #rpm2cpio kernel-2.6.27.24-170.2.68.fc10.src.rpm | cpio -iv
> kernel-2.6.27-i686.config
> #cd linux-2.6.27.24/
> #make oldconfig
> #make && make modules_install
> #cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.27.24-custom
> #cp System.map /boot/System.map-2.6.27.24-custom
> #cp .config /boot/config-2.6.27.24-custom
> #mkinitrd /boot/initrd-2.6.27.24-custom.img 2.6.27.24
> #cd /root/linux-2.6.27.24
> #patch -p1<../openswan-2.4.x.kernel-2.6.23-natt.patch
> #patch -p1<../openswan-2.4.13.kernel-2.6-klips.patch
> #make mrproper
> #make xconfig (Load di config-2.6.27.24-custom)
> ---> I have loaded Openswan IPSEC (Klips26)
> #make oldconfig
> #make && make modules_install
>
> ..but I have this error:
>
> LD      net/ipsec/built-in.o
>  CC [M]  net/ipsec/ipsec_init.o
> In file included from net/ipsec/ipsec_init.c:86:
> include/openswan/ipsec_esp.h:52: error: expected specifier-qualifier-list
> before 'des_key_schedule'
> make[2]: *** [net/ipsec/ipsec_init.o] Error 1
> make[1]: *** [net/ipsec] Error 2
> make: *** [net] Error 2
>
> Thanks.
>
> ------
>
>   Salvatore.
>
>
> ----- Original Message ----- 
> From: "Paul Wouters" <paul at xelerance.com>
> To: "Sasa" <sasa at shoponweb.it>
> Cc: <users at openswan.org>
> Sent: Tuesday, June 23, 2009 7:03 PM
> Subject: Re: [Openswan Users] Kernel-2.6.27 and nat-t patch
>
>
>> On Tue, 23 Jun 2009, Sasa wrote:
>>
>>> ..with openswan-2.4.x.kernel-2.6.23-natt.patch I have this result:
>>
>>> The next patch would create the file include/net/xfrmudp.h,
>>> which already exists!  Assume -R? [n] n
>>
>> You can't patch ontop of a failed patch. Use a clean tree.
>>
>> Paul
>>
>
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>