[Openswan Users] one VPN tunnel to multiple subnets

[Sven J. van Rooij]

Hi there!

 

I have a Clark Connect box 4.3 with Openswan... older version, with my
manual configuration everything seems to be working very well.

 

I do have one issue though...

 

The counterpart to my CC box is a Cisco 3000 concentrator.

The admin there has put together a network list for our access

 

x.x.221.0/0.0.0.255

x.x.196.0/0.0.0.255

x.x.198.0/0.0.0.255

 

 

I need the traffic for these networks ALL to go through the same tunnel.

I probably have made a mistake in my config file or something, but it
seems it should be easily doable.

 

At present if I try to create THREE tunnels, one to each network, IPsec
fails on two of the networks....

 

This is the one tunnel that works...  how do I get the other networks to
work as well??

 

 

conn hqnet-satnet

        left=y.y.126.106

        leftnexthop=y.y.126.105

        leftsubnet=192.168.112.0/255.255.255.0

        right=x.x.192.22

        rightnexthop=x.x.192.1

        rightsubnet=x.x.196.0/255.255.252.0

 

Any help is appreciated!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20090424/e15282d2/attachment.html