[Openswan Users] Connection against a Lucent FW success!!!! but may be there's still room for improvement

[Rolando Zappacosta]

Hi all,

  just have this finally working!!!! :-))  I'll post a howto on it, I promess. Now, and as I get this:

RJZ-LNX pluto # ipsec auto --up Intranet
112 "Intranet" #1: STATE_AGGR_I1: initiate
003 "Intranet" #1: ignoring unknown Vendor ID payload [4c5647392e322e3234353a425249434b3a392e322e323435]
004 "Intranet" #1: STATE_AGGR_I2: sent AI2, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024}
041 "Intranet" #1: Intranet prompt for Username:
Name enter:   <My username was here>
040 "Intranet" #1: Intranet prompt for Password:
Enter secret:
004 "Intranet" #1: STATE_XAUTH_I1: XAUTH client - awaiting CFG_set
003 "Intranet" #1: discarding duplicate packet; already STATE_XAUTH_I1
004 "Intranet" #1: STATE_XAUTH_I1: XAUTH client - awaiting CFG_set
004 "Intranet" #1: STATE_MAIN_I4: ISAKMP SA established
117 "Intranet" #2: STATE_QUICK_I1: initiate
003 "Intranet" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME
004 "Intranet" #2: STATE_QUICK_I2: sent QI2, IPsec SA established {ESP=>0x513dfaff <0xc2f7f740 xfrm=3DES_0-HMAC_SHA1 NATD=none DPD=none

I wonder if I should do something else because of these ones:
  1) 003 "Intranet" #1: discarding duplicate packet; already STATE_XAUTH_I1
  2) 003 "Intranet" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME

and this one from pluto's debug:
  3) "Intranet" #1: XAUTH: Unsupported attribute: INTERNAL_ADDRESS_EXPIRY

  Kind regards and thanks to all,
Rolando Zappacosta