[Openswan Users] Host-to-host VPN creation after hard reboot

[Julien Bonjean]

Thank you Felipe, it's working ! This feature should be documented on 
wiki I think.

Regards,

Julien

Felipe - Rasputin wrote:
> do you using DPD? if no enable it and try again.
>
>
>
> 2008/11/6 Julien Bonjean <julien.bonjean at savoirfairelinux.com 
> <mailto:julien.bonjean at savoirfairelinux.com>>
>
>     Hi,
>
>     I establish a host-to-host VPN (tunnel mode). Considering I have
>     a master a a slave. Master is booted first and slave make a boot
>     on lan. Both server use 2.4.13 version. On first slave boot,
>     everything is fine, VPN is created. If slave ipsec service is
>     shutdown gently before reboot, VPN is well created on next boot,
>     but if a hard reboot is done on slave, VPN is not created and
>     master ipsec service has to be restarted to re-create VPN. What's
>     the problem and are there some workaround ? Thank you.
>
>     Julien
>
>     -- 
>     Julien Bonjean
>     Consultant en logiciel libre
>     Savoir-faire Linux
>     http://www.savoirfairelinux.com
>     Tel : (514) 276-5468 ext 139
>
>
>     _______________________________________________
>     Users at openswan.org <mailto:Users at openswan.org>
>     http://lists.openswan.org/mailman/listinfo/users
>     Building and Integrating Virtual Private Networks with Openswan:
>     http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>
>
>
>
> -- 
> #========================#
>    Felipe Santos '<\( Rasputin )/>'  
>    E-mail/Gtalk: felipe.nix at gmail.com <mailto:felipe.nix at gmail.com>   
>            
>    MSN: flph2 at hotmail.com <mailto:flph2 at hotmail.com>
>    Comunidade Openswan-BR
>    www.br.openswan.org <http://www.br.openswan.org>
> #========================#


-- 
Julien Bonjean
Consultant en logiciel libre
Savoir-faire Linux
http://www.savoirfairelinux.com
Tel : (514) 276-5468 ext 139

-------------- next part --------------
A non-text attachment was scrubbed...
Name: julien_bonjean.vcf
Type: text/x-vcard
Size: 388 bytes
Desc: not available
Url : http://lists.openswan.org/pipermail/users/attachments/20081106/ff829f60/attachment.vcf