[Openswan Users] Installation/setup issues...

[Peter McGill]

I suspect that's due to Opportunistic encryption.

Try adding the following to your ipsec.conf

include /etc/ipsec.d/examples/no_oe.conf

Peter McGill
 

> -----Original Message-----
> From: users-bounces at openswan.org 
> [mailto:users-bounces at openswan.org] On Behalf Of Mark Williams
> Sent: March 6, 2008 8:18 AM
> To: users at openswan.org
> Subject: Re: [Openswan Users] Installation/setup issues...
> 
> Hi all,
> 
> >  > If it makes any difference, the VPN server is running 
> openswan-2.4.6,
> >  > and im running openswan-2.5.17.
> >
> >  Try using 2.4.12 on the client? 2.5.x still has some rough edges.
> 
> Ok, 2.4.12 is compiled and installed.
> When i start 2.4.12 its adding a heap of un-related (as far as i can
> tell, i dont recognise any of the IPs) routing entries which is
> killing off my local lan connection.
> 
> What is it trying to do???
> 
> Thanks again.
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Building and Integrating Virtual Private Networks with Openswan: 
> http://www.amazon.com/gp/product/1904811256/104-3099591-294632
> 7?n=283155