[Openswan Users] Installation/setup issues...

[Mark Williams]

On Thu, Mar 6, 2008 at 11:48 PM, Mark Williams <mwp at mwp.id.au> wrote:
> Hi all,
>
>
>  >  > If it makes any difference, the VPN server is running openswan-2.4.6,
>  >  > and im running openswan-2.5.17.
>  >
>  >  Try using 2.4.12 on the client? 2.5.x still has some rough edges.
>
>  Ok, 2.4.12 is compiled and installed.
>  When i start 2.4.12 its adding a heap of un-related (as far as i can
>  tell, i dont recognise any of the IPs) routing entries which is
>  killing off my local lan connection.

........... this is the routing table its creating:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
202.12.27.33    192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.228.79.201  192.168.0.254   255.255.255.255 UGH   0      0        0 br0
198.41.0.4      192.168.0.254   255.255.255.255 UGH   0      0        0 br0
193.0.14.129    192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.5.5.241     192.168.0.254   255.255.255.255 UGH   0      0        0 br0
128.8.10.90     192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.112.36.4    192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.203.230.10  192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.58.128.30   192.168.0.254   255.255.255.255 UGH   0      0        0 br0
128.63.2.53     192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.36.148.17   192.168.0.254   255.255.255.255 UGH   0      0        0 br0
198.32.64.12    192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.33.4.12     192.168.0.254   255.255.255.255 UGH   0      0        0 br0
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 br0
0.0.0.0         192.168.0.254   128.0.0.0       UG    0      0        0 br0
128.0.0.0       192.168.0.254   128.0.0.0       UG    0      0        0 br0
0.0.0.0         192.168.0.254   0.0.0.0         UG    0      0        0 br0