[Openswan Users] Ipsec auto --up {tunnelname} hangs

[Greg Scott]

> Haven't tried the env variables yet - I'll work on that now.  

OK - I gave those env variables values and tried it - see below.  I let
it sit there hung for a little more than 9 minutes before I aborted it.
Did I give them reasonable values?



[root at lme-fw ~]#
[root at lme-fw ~]# PLUTO_MAXIMUM_RETRANSMISSIONS_INITIAL=2
[root at lme-fw ~]# PLUTO_EVENT_RETRANSMIT_DELAY=10
[root at lme-fw ~]# date
Fri Jun 20 17:15:53 CDT 2008
[root at lme-fw ~]# ipsec auto --add JanesvillePNT-Everywhere
[root at lme-fw ~]# ipsec auto --up JanesvillePNT-Everywhere
104 "JanesvillePNT-Everywhere" #90: STATE_MAIN_I1: initiate
003 "JanesvillePNT-Everywhere" #90: ignoring unknown Vendor ID payload
[4f455f5d7b764b67436f4f49]
003 "JanesvillePNT-Everywhere" #90: received Vendor ID payload [Dead
Peer Detection]
003 "JanesvillePNT-Everywhere" #90: received Vendor ID payload [RFC
3947] method set to=110
106 "JanesvillePNT-Everywhere" #90: STATE_MAIN_I2: sent MI2, expecting
MR2
003 "JanesvillePNT-Everywhere" #90: NAT-Traversal: Result using 3: no
NAT detected
108 "JanesvillePNT-Everywhere" #90: STATE_MAIN_I3: sent MI3, expecting
MR3
003 "JanesvillePNT-Everywhere" #90: we require peer to have ID
'@janesvillepnt.local', but peer declares '@janesvillecheetah.local'
218 "JanesvillePNT-Everywhere" #90: STATE_MAIN_I3:
INVALID_ID_INFORMATION


# It's hanging right now - I will leave it for a couple minutes.


[root at lme-fw ~]# date
Fri Jun 20 17:25:08 CDT 2008
[root at lme-fw ~]#


- Greg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20080620/bafa39fe/attachment.html