[Openswan Users] Problems with xL2tp/ppp with openswan on vista

[James]

Hi guys,

I've seen a couple of related problem and didn't spot any resolution to 
this.
I have only one user that has this problem
He is using Vista 64 bit operating system otherwise all my users are 
fine and dandy.
I've had him test with his firewall up and with it down and it gets the 
same results.

He *might* be using ipv6 on his laptop so i dunno if this could be the 
problem


Problem:
1. He gets disconnected after about 60 mins.
2. On reconnect it fails to allow
3. He has to reboot his laptop to reconnect

Logs from system:
Apr 28 06:40:55 tunnel xl2tpd[22261]: control_finish: Peer requested 
tunnel 1 tw
ice, ignoring second one.
Apr 28 06:40:55 tunnel xl2tpd[22261]: Connection established to 
xxx.xxx.xxx.xxx,
1701.  Local: 12620, Remote: 1 (ref=0/0).  LNS session is 'default'
Apr 28 06:40:55 tunnel xl2tpd[22261]: check_control: Received out of 
order contr
ol packet on tunnel 1 (got 3, expected 2)
Apr 28 06:40:55 tunnel xl2tpd[22261]: handle_packet: bad control packet!
Apr 28 06:40:55 tunnel xl2tpd[22261]: result_code_avp: result code not 
appropria
te for Incoming-Call-Request.  Ignoring.

Apr 28 08:41:01 tunnel xl2tpd[22261]: Untrustingly terminating pppd: 
sending KIL
L signal to pid 19536
Apr 28 08:41:01 tunnel pppd[19536]: Modem hangup
Apr 28 08:41:01 tunnel xl2tpd[22261]: pppd 19536 successfully terminated
Apr 28 08:41:01 tunnel xl2tpd[22261]: Connection 1 closed to 
xxx.xxx.xxx.xxx, por
t 1701 (Timeout)
Apr 28 08:41:06 tunnel xl2tpd[22261]: Unable to deliver closing message 
for tunn
el 12620. Destroying anyway.
Apr 28 08:41:35 tunnel xl2tpd[22261]: Can not find tunnel 12620 (refhim=0)
Apr 28 08:41:35 tunnel xl2tpd[22261]: network_thread: unable to find 
call or tun
nel to handle packet.  call = 0, tunnel = 12620 Dumping.


Help please?
TIA
-James