[Openswan Users] openswan 2.4.9 run on ARM error ?

[李正光]

Dear all:
I have a client embedded machine which will connect to the remote IPSEC
server(juniper's SSG550 machine). The embedded machine is arm based machine
and its kernel is linux 2.4.19 .
I crosscompile openswan 2.4.9 with NAT-T patch/Klips and copy it to the
embedded machine.But it always show the error message:


pluto[217]: "net-to-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3

108 "net-to-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3

pluto[217]: | modecfg pull: noquirk policy:push not-client
pluto[217]: | phase 1 is done, looking for phase 1 to unpend
pluto[217]: | next event EVENT_RETRANSMIT in 10 seconds for #1

-------------------------------------------------------------------------------------

it always ran to this step and retransmit again and again !!

------------------------------------------------------------------------------------

I don't know where is the error that I should correct ?I need your
suggestion !!

I have run openswan 2.4.9 on x86 linux 2.4.19 and it connect ok.but on arm
based linux,it just stuck in that step!



Thanks !

Jacky Lee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20070921/4710a014/attachment.html