[Openswan Users] Link established no data going through

Martin Erasmus martin at onyx.co.za
Fri Oct 12 06:14:34 EDT 2007

Hi All

I was running fc2 on all my servers, 5 systems, 4 external servers linking
to the main server at head office. I have a hard drive crash on my main
server, I have now had to install fc7.

The 4 external servers are running fc2 with U2.1.5/K2.6.8-1.521smp...
The main Server is running fc7 with U2.4.7/K2.6.21-1.3194.fc7

3 of the external servers link and work no problem the last one seems to
link but no data travels thought the link

when I start the link I get the following

ipsec_setup: Starting Openswan IPsec U2.1.5/K2.6.8-1.521smp...
104 "besho-besntl" #1: STATE_MAIN_I1: initiate
003 "besho-besntl" #1: ignoring Vendor ID payload [4f455a7e4261425d...]
003 "besho-besntl" #1: ignoring Vendor ID payload [Dead Peer Detection]
106 "besho-besntl" #1: STATE_MAIN_I2: sent MI2, expecting MR2
108 "besho-besntl" #1: STATE_MAIN_I3: sent MI3, expecting MR3
004 "besho-besntl" #1: STATE_MAIN_I4: ISAKMP SA established
112 "besho-besntl" #2: STATE_QUICK_I1: initiate
004 "besho-besntl" #2: STATE_QUICK_I2: sent QI2, IPsec SA established
{ESP=>0x2f9d6b26 <0xed6cf187 IPCOMP=>0x00003e3e <0x00009a08}

but nothing travels through no ping nothing from both sides

any Ideas


More information about the Users mailing list