[Openswan Users] Opens wan sleep conexion

[Walter Willis]

compile openswan in linux kernel,
the problem is the conexion sleep if i run command


service ipsec star in the two sides, the conexion pining, but no ping one
hour and pining and not pass the ping.

There is some command to keep alive the connection?


my files is:


config setup
        interfaces=%defaultroute
        # Debug-logging controls:  "none" for (almost) none, "all" for lots.
        # klipsdebug=none
        # plutodebug="control parsing"
        nat_traversal=yes
        #uniqueids=no
        virtual_private=%all

conn roberto-walter
        keyingtries=1
        #type=tunnel
        authby=rsasig
        #keyexchange=ike
        #keylife=2m
        #rekey=yes
        compress=yes
        left=192.168.10.65
        leftsubnet=192.168.254.0/24
        leftid=@roberto.yyyyyy.com.pe
        leftrsasigkey=0sAQOJ...
        #leftnexthop=%defaulroute
        #also=config-base
        right=bbbb.servebbs.org
        rightid=@walter.yyyyyy.com.pe
        rightsubnet=192.168.231.0/24
        rightrsasigkey=0sAQOv0NN5hW...
        #rightnexthop=200.47.186.225
        auto=start

the other iqual but the configure and keys in their place.

the ipsec auto --status and

000 #5: "walter-roberto":4500 STATE_QUICK_R2 (IPsec SA established);
EVENT_SA_REPLACE in 28496s; newest IPSEC; eroute owner
000 #5: "walter-roberto" esp.f27346ba at 200.60.90.184
esp.93f3b88 at 192.168.1.199 comp.5314 at 200.60.90.184 comp.1bf3 at 192.168.1.199
tun.0 at 200.60.90.184 tun.0 at 192.168.1.199
000 #4: "walter-roberto":4500 STATE_MAIN_R3 (sent MR3, ISAKMP SA
established); EVENT_SA_REPLACE in 3295s; newest ISAKMP; lastdpd=-1s(seq in:0
out:0)

is it lastdpd=-1s(seq in:0 out:0)????

THANKS!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20071108/69ea400d/attachment-0001.html