[Openswan Users] No connection errors.

[Andy Gay]

On Sun, 2007-05-27 at 09:51 -0400, erol wrote:
> Hi all,
> 
> Using OpenSwan and l2tpd I've run into the following error in my
> logs when trying to connect:
> 
> May 24 09:00:09 ds24 pluto[7967]: packet from 59.90.72.248:500: initial Main Mode message received on 201.218.196.20:500 but no
> connection has been authorized

Your conn is not being loaded, because you have set 'auto=ignore'.
Change that to 'auto=add' and restart Openswan.

> 
> 
> I have Googled the error and tried the various suggestions I've
> ound. Admittedly my knowledge is a little thin when it comes to
> OpenSWAN and such. However I'd appreciate if someone could take a
> look at my ipsec barf output and tell me if things look kosher.
> 
> This was setup using a Howto I had previously used (and
> successfully at that, which is why I am further baffled).
> 
> 
> Anyhow, any assistance would be most appreciated. You can find
> the barf output here:
> 
> http://201.218.196.20/barf
> 
> /erol
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Building and Integrating Virtual Private Networks with Openswan: 
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>