[Openswan Users] tunnel problem

[Djiby SY]

Hello All,

I have problem with making up my tunnel.
My config is Linux Openswan U2.4.4/K2.6.12-1.1372_FC3 (netkey). The other
side uses CISCO.

Here is the log.

104 "" #9: STATE_MAIN_I1: initiate
003 "" #9: ignoring unknown Vendor ID payload
[4048b7d56ebce88525e7de7f00d6c2d3c0000000]
106 "" #9: STATE_MAIN_I2: sent MI2, expecting MR2
003 "" #9: received Vendor ID payload [Cisco-Unity]
003 "" #9: received Vendor ID payload [XAUTH]
003 "" #9: ignoring unknown Vendor ID payload
[b1b9e7ec1671a8fb6186bf64f084352e]
003 "" #9: ignoring Vendor ID payload [Cisco VPN 3000 Series]
108 "" #9: STATE_MAIN_I3: sent MI3, expecting MR3
003 "" #9: received Vendor ID payload [Dead Peer Detection]
004 "" #9: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY
cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024}
117 "" #10: STATE_QUICK_I1: initiate
010 "" #10: STATE_QUICK_I1: retransmission; will wait 20s for response
010 "" #10: STATE_QUICK_I1: retransmission; will wait 40s for response
031 "" #10: max number of retransmissions (2) reached STATE_QUICK_I1.  No
acceptable response to our first Quick Mode message: perhaps peer likes no
proposal
000 "" #10: starting keying attempt 2 of an unlimited number, but releasing
whack

What 's wrong?

thanks
Djiby
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20070626/381e22b6/attachment.html