[Openswan Users] routing on existing tunnel.

[gurvinder.er at gmail.com]

On Monday 03 December 2007 2:44 am, you wrote:
> On Mon, 3 Dec 2007, Gurvinder Singh wrote:
> > I am using openswan 2.4.4(netkey). my current step is working very fine
> > which is
> >
> > (site a) 10.10.10.0/24....public ip..public ip.....10.10.11.0/24 (site
> > b).
> >
> > now i have one more network 10.10.12.0/24 at site a, how can i use the
> > existing tunnel to get
> > the communication between 10.10.11.0/24 and 10.10.12.0/24. I tried by
> > adding routes at site b but its
> > not working.
>
> You need to add tunnels, not routes. IPsec is not a virtual ethernet
> device. It has security policies that dictate which packets may or may not
> go through the tunnel.
>
> Paul
Thankz for reply Paul.

when i create one more tunnel between 10.10.12.0/24 and 10.10.11.0/24 ie. two 
tunnels over the same public IPs with different networks
10.10.10.0/24..........10.10.11.0/24
10.10.12.0/24..........10.10.11.0/24

It works fine.


Gurvinder Singh