[Openswan Users] VPN Ipsec, I can't browse

[Miranda, Roberto]

The VPN client and all other clients and servers have the same wins and dns
configuration (the VPN client uses the same wins and dns than others when it
gets connected). Also about "Client for Microsoft Networking".

The problem is that if the VPN Client (after it gets connected) goes to
"Windows Explorer" and then "Network Neighborhoods", nothing is shown.  

-----Mensaje original-----
De: Jacco de Leeuw [mailto:jacco2 at dds.nl] 
Enviado el: viernes, 29 de septiembre de 2006 3:21
Para: users at openswan.org
Asunto: Re: [Openswan Users] VPN Ipsec, I can't browse

Miranda, Roberto wrote:

> *I have a VPN server OpenSwan (2.4.5) on Linux debian with l2tp and ppp. *
> *The connection was established with no problem. VPN server (l2tp) 
> assigns IP, DNS and wins address for internal network (LAN). ***
> *I have connectivity but I can't browse my Network Neighborhoods.*

All other clients and servers will have to be configured to use
the same DNS and WINS server as the VPN client. Otherwise
the server \\pc is not known to the WINS server and the client
can't find it.

Also make sure you installed the "Client for Microsoft Networking"
in the network settings at the client.

Jacco
-- 
Jacco de Leeuw                         mailto:jacco2 at dds.nl
Zaandam, The Netherlands           http://www.jacco2.dds.nl