[Openswan Users] Route to subnet not established?

[Paul Wouters]

On Thu, 23 Mar 2006, Per Arnold Blåsmo wrote:

> >> up-client output: Cannot open "/proc/sys/net/ipv4/route/flush"
> >> route-client output: Cannot open "/proc/sys/net/ipv4/route/flush"
> >>
> >> which as I understand indicates that pluto is unable to flush the
> >> routing tables after altering the routing.
> >>
> >
> > Does the machine have SElinux enabled?
> >
> >
> Yes, it is on. I do not know SElinux, how does it influence this? And
> what do I need to change?

if it is selinux (I am just guessing that might be part of the problem), then
try editing /etc/sysconfig/selinux amd set SELINUX=disabled.

another option I thought of is Advanced Routing not being part of your kernel,
but if you run a stock fedora kernel, that is not the case. If you run your
own compiled kernel, check that CONFIG_IP_ADVANCED_ROUTER is enabled.

> > Check IP forwarding in /etc/sysctl.conf (or /proc)
> >
> IP forwarding is on!

Okay. Then I am not entirely sure what is causing your problem.

Paul
-- 
Building and integrating Virtual Private Networks with Openswan:
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155