[Openswan Users] Openswan with Cisco and Radius

[Paul Wouters]

On Mon, 20 Feb 2006, Michael Przysucha wrote:

> I want to set up a Road Warrior scenario with Radius auth at the static site an I am a newbie to VPN/IPsec.
> I red along with the documentation but found no case which fits to my requirements.
>
> On my site there is a Debian box which acts as router (iptables based) for several Win and Linux machines in my
> subnet. All requests for 131.173.0.0/16 and 172.16.0.0/12 shall be routed through the tunnel.
> The box is up 24/7 but every 24h a reconnect is required (ISP restrictions) and the IP canges. The tunnel shall be
> rebuild after the new connect, too.
>
> On the other site there is a Cisco 7200 VXR gateway with static IP operated by the copmputing centre of my university,
> so I cannot get the config of it. It requires a username and password for building the connection
>
> The client site will get a public IP like 131.173.x.y.

Looks like it might be an XAUTH deployment. See docs/README.XAUTH*
If you have a PCF file for use with Windows or the Linux Cisco VPN client, see
contrib/cisco/pcf2os.pl.

Paul