[Openswan Users] net 2 net connection

[William Man]

Hi,

I have done a scan of my machine and there is no ipsec.ko or ipsec.o
anywhere.  Do i have things missing?
There packages that are installed are:
ipsec-tools-0.5-2.fc3
openswan-2.4.0rc3-1
openswan-klips-2.3.0-2.6.9_1.724_FC3_1

where do i usually find ipsec.ko?

W

----- Original Message ----- 
From: "Paul Wouters" <paul at xelerance.com>
To: "William Man" <williamman at visualrock.co.uk>
Cc: <users at openswan.org>
Sent: Wednesday, September 14, 2005 11:28 PM
Subject: RE: [Openswan Users] net 2 net connection


> On Wed, 14 Sep 2005, William Man wrote:
>
> > My site1 uses a 2.4 kernel, and site2 uses a 2.6 kernel.
> > Hence, site1 uses klips, and site2 uses 26sec.
> >
> > Is there anyway to force site2 to use klips? As it does not have the
ipsec0
> > interface, like site1.  I am using FC3 on site2, with openswan.2.4 and
> > openswan-klips installed.
> >
> > I notice on site1, the module ipsec.ko is inserted, but this does not
happen
> > on site2.  I guess it is used 26sec by default, is there any way of
change
> > it to use klips.
>
> Make sure that the ipsec.ko module is loaded, and that the af_key.ko,
esp4.ko,
> ah4.ko ipcomp.ko modules are not loaded.
>
> An easy way out is to add 'modprobe ipsec' to /etc/rc.d/rc.sysinit
>
> Paul
> ________________________________________________________________
> This email has been scanned by ClamAV, and should be virus free.
>

________________________________________________________________
This email has been scanned by ClamAV, and should be virus free.