[Openswan Users] nat-t

[Brad Swartz]

I had this working from a public address (same network as the right
side) on the client before I added the nat_traversal and virtual_private
lines. Once I added those two lines the public address on the client no
longer worked. Also the client from behind a private address (dsl at
home) did not work at that time either.
 
?1. With nat-t on will it work from both public and private addresses?
 
?2. What do you see wrong that the private at home did not work?
 
 
config setup
               interfaces=%defaultroute
               nat_traversal=yes
              
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
 
conn %default
               keyingtries=0
               disablearrivalcheck=no
               pfs=yes
               authby=secret
 
conn test
               type=tunnel
               left=0.0.0.0
               leftsubnet=192.168.2.58/32
               right=12.19.X.X
               rightnexthop=12.19.X.X
               rightsubnet=192.168.0.0/16
               auto=add
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20050906/77100e40/attachment-0001.htm