[Openswan Users] Klips patch

[sasa]

"Oliver Tomkins" wrote:

> I ended up with using a vanilla 2.6.11 kernel (as recommended on here) 
> with the 2.6 KLIPS patch.

..therefore with FC3 of default is the kernel 2.6.9, after of you have compiled kernel 2.6.11, but what klips patch you have used ??

openswan-2.4.0.kernel-2.6-klips.patch.gz

..or other klips patch ?? and then you have insalled also nat-t patch ??

> Then installed the two packages you listed below (in the other order) 
> and it seems to work fine.

..after this operation (new kernel 2.6.11 + patch) you have made:

#rpm -hiv openswan-2.4.0-1.src.rpm
#cd /usr/src/redhat/SOURCES
#tar zxvf openswan-2.4.0.tar.gz
#cd openswan-2.4.0/packaging/redhat/

 ...then edit all config-* files in this mode:

#define CONFIG_KLIPS_NAT_TRAVERSAL 1
#define CONFIG_IPSEC_NAT_TRAVERSAL 1
#rpmbuild -bb /usr/src/redhat/SPECS/openswan.spec --define 'buildklips 1' --define 'kversion 
  kernel-2.6.11'

#rpm -Uhv /usr/src/redhat/RPMS/i386/openswan-2.4.0-1.i386.rpm
#rpm -Uhv /usr/src/redhat/RPMS/i386/openswan-klips-2.4.0-2.6.12_1.1378_FC3_1.i386.rpm

..it's just this this order ??
still thanks.

        Salvatore.