[Openswan Users] pluto failure

[Marco Berizzi]

Paul Wouters wrote:

> Can you add dumpdir=/tmp in ipsec.conf's config setup section, and
produce
> a core file and run gdb on it to get a backtrace?

Here is.


GNU gdb 6.3
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you
are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for
details.
This GDB was configured as "i486-slackware-linux"...Using host
libthread_db library "/lib/libthread_db.so.1".

Core was generated by
`/usr/local/libexec/ipsec/pluto --nofork --secretsfile
/etc/ipsec.secrets --ipse'.
Program terminated with signal 6, Aborted.
#0  0x40082ef1 in ?? ()
(gdb) bt
#0  0x40082ef1 in ?? ()
#1  0x40082b15 in ?? ()
#2  0x00007e83 in ?? ()
#3  0x00000006 in ?? ()
#4  0x40172ff4 in ?? ()
#5  0x08109138 in ?? ()
#6  0xbffff328 in ?? ()
#7  0x400843fd in ?? ()
#8  0x00000006 in ?? ()
#9  0xbffff210 in ?? ()
#10 0x00000000 in ?? ()
#11 0x00000020 in ?? ()
#12 0x00000000 in ?? ()
#13 0x00000000 in ?? ()
#14 0x00000000 in ?? ()
#15 0x00000000 in ?? ()
#16 0x00000000 in ?? ()
#17 0x00000000 in ?? ()
#18 0x00000000 in ?? ()
#19 0x00000000 in ?? ()
#20 0x00000000 in ?? ()
#21 0x00000000 in ?? ()
#22 0x00000000 in ?? ()
#23 0x00000000 in ?? ()
#24 0x00000000 in ?? ()
#25 0x00000000 in ?? ()
#26 0x00000000 in ?? ()
#27 0x00000000 in ?? ()
#28 0x00000000 in ?? ()
#29 0x00000000 in ?? ()
#30 0x00000000 in ?? ()
#31 0x00000000 in ?? ()
#32 0x00000000 in ?? ()
#33 0x00000000 in ?? ()
#34 0x00000000 in ?? ()
#35 0x00000000 in ?? ()
#36 0x00000000 in ?? ()
#37 0x00000000 in ?? ()
#38 0x00000000 in ?? ()
#39 0x00000000 in ?? ()
#40 0x00000000 in ?? ()
#41 0x00000000 in ?? ()
#42 0x00000000 in ?? ()
#43 0x400600b0 in ?? ()
#44 0x40059000 in ?? ()
#45 0xbffff2b0 in ?? ()
#46 0x08100f38 in ?? ()
#47 0x400bc614 in ?? ()
#48 0x00000000 in ?? ()
#49 0x00000000 in ?? ()
#50 0x00000000 in ?? ()
#51 0x00000000 in ?? ()
#52 0x080e9380 in ipv6_all ()
#53 0x40174a0c in ?? ()
#54 0x08109138 in ?? ()
#55 0x08109138 in ?? ()
#56 0xbffff4c0 in ?? ()
#57 0x40015ff8 in ?? ()
#58 0x00000001 in ?? ()
#59 0x400164d0 in ?? ()
#60 0xbffff310 in ?? ()
#61 0x4000a269 in ?? ()
#62 0x4001667c in ?? ()
#63 0x40059308 in ?? ()
#64 0x00000001 in ?? ()
#65 0x00000001 in ?? ()
#66 0x00000000 in ?? ()
#67 0x08048ac0 in ?? ()
#68 0x080e4214 in ?? ()
#69 0x0000004b in ?? ()
#70 0x08049386 in ?? ()
#71 0x400600b0 in ?? ()
#72 0x08109138 in ?? ()
#73 0x08109138 in ?? ()
#74 0xbffff4c0 in ?? ()
#75 0xbffff338 in ?? ()
#76 0x4000a440 in ?? ()
#77 0x00000000 in ?? ()
#78 0x401749c0 in ?? ()
#79 0x08109138 in ?? ()
#80 0xbffff4c0 in ?? ()
#81 0xbffff338 in ?? ()
#82 0x08056da3 in passert_fail (
    pred_str=0x6 <Error reading address 0x6: No such file or directory>,
    file_str=0xbffff210 " ", line_no=0) at log.c:598
Previous frame inner to this frame (corrupt stack?)
(gdb) quit