[Openswan Users] pluto failure

[Paul Wouters]

On Wed, 4 May 2005, Marco Berizzi wrote:

> #ipsec setup start
> ipsec_setup: Starting Openswan IPsec 2.3.1...
> ipsec_setup: /usr/local/libexec/ipsec/klipsdebug: pfkey write failed,
> tried to write 72 octets, returning -1 with errno=28.
> ipsec_setup: no room in kernel SAref table.  Cannot process request.
> ipsec_setup: /usr/local/libexec/ipsec/eroute: pfkey write failed,
> returning -1 with errno=28.
> ipsec_setup: no room in kernel SAref table.  Cannot process request.
> ipsec_setup: /usr/local/libexec/ipsec/spi: pfkey write failed
> (errno=28): no room in kernel SAref table.  Cannot process request.

> klips_error:ipsec_xmit_send: ip_send() failed, err=1

> IPSEC EVENT: KLIPS device ipsec0 shut down.
> IPSEC EVENT: KLIPS device ipsec0 shut down.
> IPSEC EVENT: KLIPS device ipsec0 shut down.
> IPSEC EVENT: KLIPS device ipsec0 shut down.
> IPSEC EVENT: KLIPS device ipsec0 shut down.

> May  4 07:12:23 Pleiadi ipsec__plutorun: /usr/local/lib/ipsec/_plutorun:
> line 221: 18782 Aborted                 (core dumped)

Can you add dumpdir=/tmp in ipsec.conf's config setup section, and produce
a core file and run gdb on it to get a backtrace?

Thanks,

Paul