[Openswan Users] Openswan-win2k

[Jerome Kaidor]

Norman Rasmussen wrote:
> 
> If you want windows to set you up with l2tp, then you only need to
> configure a 'virtual private connection' and set the type of network
> to 'l2tp ipsec vpn'.  Then when you try and dial XP will establish the
> ipsec tunnel, and try and login to your l2tp daemon, which will use
> ppp to create the connection - giving you an ip on the network, and
> access to the other machines.
> 
*** So what about the error messages in /var/log/secure?


> > Win2k laptop, I get the following messages in /var/log/secure:
> > -------------------- snip ---------------------
> > Jun  8 09:38:30 tr4 pluto[3545]: packet from 67.118.246.28:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000004]
> > Jun  8 09:38:30 tr4 pluto[3545]: packet from 67.118.246.28:500: ignoring Vendor ID payload [FRAGMENTATION]
> > Jun  8 09:38:30 tr4 pluto[3545]: packet from 67.118.246.28:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but port floating is off
> > Jun  8 09:38:30 tr4 pluto[3545]: packet from 67.118.246.28:500: ignoring Vendor ID payload [Vid-Initial-Contact]
> > Jun  8 09:38:30 tr4 pluto[3545]: packet from 67.118.246.28:500: initial Main Mode message received on 63.193.114.85:500 but no connection has been authorized
> > ------------------ endsnip --------------------
> > 
                - Jerry Kaidor