[Openswan Users] Fedora Core 1 build problem

[Ted Kaczmarek]

On Thu, 2005-01-13 at 21:40 +0100, Paul Wouters wrote:
> On Thu, 13 Jan 2005, Ted Kaczmarek wrote:
> 
> > + /usr/bin/make -C /usr/src/redhat/BUILD/openswan-2.3.0
> > MODBUILDDIR=/usr/src/redhat/BUILD/openswan-2.3.0/BUILD.i686-smp
> > OPENSWANSRCDIR=/usr/src/redhat/BUILD/openswan-2.3.0
> > KERNELSRC=/usr/src/linux-2.4.22-1.2199.nptl ARCH=i386 SUBARCH=i386
> > MODULE_DEF_INCLUDE=/usr/src/redhat/BUILD/openswan-2.3.0/packaging/redhat/config-i686-smp.h module
> 
> > ipsec_init.o /usr/src/redhat/BUILD/openswan-2.3.0/linux/net/ipsec/ipsec_init.c
> > /usr/src/redhat/BUILD/openswan-2.3.0/linux/net/ipsec/ipsec_init.c:101:2:
> > #error "kernel configuration must include ESP or AH"
> 
> Is there a mismatch between CONFIG_KLIPS vs CONFIG_IPSEC?
Hve no clue, where can I check?
> 
> How are you building this? Since openswan-2.3.0-1.src.rpm uses the module26
> target, so it cannot build out of the box on a 2.4 kernel.
> If you manually untarred the source, use the packaging/redhat/openswan.spec
> file and change 'modules26' to 'module
> 
> Paul
I was attemptimg an rpmbuild -ba --target=i686 openswan.spec.
I didn't see any reference to modules26 in either the openswan.26spec or
openswan.spec, which are both found in openswan-2.3.0/packaging/redhat.
In openswan-2.3.0/packaging/makefiles their are module26.make and
module26.sh. 

Going to try building from source in the mean time, just need to test
for now. 2.1.5 has been rock solid for me, outside of the snmpd quirk.

Ted