[Openswan Users] Issues with L2TPNS and Openswan on Fedora Core 4

Norman Rasmussen normanr at gmail.com
Tue Aug 2 23:48:33 CEST 2005


I'm using the debian l2tp daemon (based off http://www.marko.net/l2tp
and http://www.sourceforge.net/projects/l2tpd apparently from the man
page)

My client in WinXP SP2, and it happily connects via the l2tp daemon to
ppp and authenticates.   Is there any particular reason why you are
using l2tpns?

What's you client? and have you tried using ppp authentication instead
of l2tp authentication?

On 02/08/05, Tim P <panterafreak at gmail.com> wrote:
> I fixed this issue because I needed to set my bind address to either
> the outside address or a new address that resided on my internal
> subnet (forget which, dont have the machine accessible right now).
> 
> I have a new problem in that the L2TP server never seems to do
> anything with the vpn request for l2tp authentication.  I have a good
> ipsec tunnel (you said it looked good when you saw the output) and the
> radius authentication works fine but I can't seem to get L2TP to show
> anything in the logs when a request comes through.  Essentially ipsec
> kills the tunnel after a minute or so when no authentication is
> completed.
> 
> On 8/2/05, Jacco de Leeuw <jacco2 at dds.nl> wrote:
> > Tim P wrote:
> >
> > > I am using L2TPNS for my L2TP server and when it brings up the tun0
> > > interface (actually when I start the service/executable) it seems to
> > > kill my second nic in the box.  I have eth0 as my "outside" nic and
> > > eth1 as my "inside" nic.  When tun0 becomes active I am no longer able
> > > to ping on the inside network.
> >
> > It "kills" your internal interface? What does that mean?
> > You are pinging from what to what? The IPsec connection is not even up
> > at that stage?
> >
> >
> > > set bind_address 192.168.0.1
> > >
> > > I am hosting freeradius on the vpn box, I can use 127.0.0.1 correct?
> >
> > AFAIK, yes.
> >
> > > Bind_address I have set to my eth1 (inside) nic address, is that correct?
> >
> > What if you use your 'outside' nic address?
> >
> > Jacco
> > --
> > Jacco de Leeuw                         mailto:jacco2 at dds.nl
> > Zaandam, The Netherlands           http://www.jacco2.dds.nl
> > _______________________________________________
> > Users mailing list
> > Users at openswan.org
> > http://lists.openswan.org/mailman/listinfo/users
> >
> _______________________________________________
> Users mailing list
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> 


-- 
- Norman Rasmussen
 - Email: norman at rasmussen.co.za
 - Home page: http://norman.rasmussen.co.za/


More information about the Users mailing list