[Openswan Users] IPSec pass-through not working ?

[Ingo Bruell]

Hi,

i  have  tried  to set up a dsl gateway (belkin) to pass through IPSec
but  i  had  no  success.  On both sides is openswan 2.1.3 from debian
(sarge) running. Without the gateway it works.

I  just  want  to  test  if  it  works cause i have to connect windows
clients via IPSec and have'nt got it working now.

What i have to do to get it working ?

Or which dsl-gateway/router (not expensive) will support it ?

The following messages were shown:

104 "obl-bhp" #8: STATE_MAIN_I1: initiate
003 "obl-bhp" #8: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03]
106 "obl-bhp" #8: STATE_MAIN_I2: sent MI2, expecting MR2
003 "obl-bhp" #8: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike-02/03: i am NATed
108 "obl-bhp" #8: STATE_MAIN_I3: sent MI3, expecting MR3
003 "obl-bhp" #8: discarding duplicate packet; already STATE_MAIN_I3
010 "obl-bhp" #8: STATE_MAIN_I3: retransmission; will wait 20s for response




best regards

Ingo Bruell

---
<ibruell at gmx.de>
<ICQ# 40377720>
Oldenburg  PGP-Fingerprint: CB01 AE12 B359 87C4 BF1C  953C 8FE7 C648 169E E5FC
Germany    PGP-Public-Key available at pgpkeys.mit.edu
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 250 bytes
Desc: not available
Url : http://lists.openswan.org/pipermail/users/attachments/20040906/db60bf11/attachment.bin