[Openswan Users] KLIPS module not loaded

[Ulrich Lauther]

Hi,

I compiled kernel 2.6.8.1 with option shown below, did in openswan-2.2.0:
	make programs
	make install

When I do: "ipsec setup start", ipsec is started without error messages,
but
	ipsec setup status

gives me:

	IPsec running
	but...
	KLIPS module is not loaded!

any idea what I did wrong?

Thanks for any help,

	-ulrich

CONFIG_NET=y

CONFIG_PACKET=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y

CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_TUNNEL=y
CONFIG_NETFILTER=y

CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPCHAINS=y

CONFIG_XFRM=y
CONFIG_XFRM_USER=y



CONFIG_NETDEVICES=y
CONFIG_DUMMY=m

CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_TEST=y
-- 
	-lauther

----------------------------------------------------------------------------
Ulrich Lauther          ph: +49 89 636 48834 fx: ... 636 42284
Siemens CT SE 6         Internet: Ulrich.Lauther at siemens.com