[Openswan Users] server fails to add route to roadwarrior

[Nate Carlson]

On Fri, 26 Mar 2004, Robert W. Burgholzer wrote:
> I have managed to get my client side adding a route, I had to actually
> restart my server, cause I think I added some inadvertent routing
> glitches due to ignorance. Now, my client/roadwarrior will negotiate and
> add a route using the default settings: (meggages): KLIPS ipsec0 on ppp0
> 141.152.55.223/255.255.255.255 pointopoint 10.22.1.1
> 
> , but my server/gateway now spits an error trying to add the route:
> 
> ip route add 141.152.55.223/32 via 141.152.55.223 dev ipsec0

So the client is behind a NAT gateway, at 10.20.1.x, and your server is 
141.152.55.223?  Is the client NAT'd behind the 141.152.55.223 address, or 
is it somewhere else?

Can you include a dump of your ipsec.conf and routing tables?

------------------------------------------------------------------------
| nate carlson | natecars at natecarlson.com | http://www.natecarlson.com |
|       depriving some poor village of its idiot since 1981            |
------------------------------------------------------------------------