[Openswan Users] server fails to add route to roadwarrior

[Robert W. Burgholzer]

I have managed to get my client side adding a route, I had to actually 
restart my server, cause I think I added some inadvertent routing glitches 
due to ignorance. Now, my client/roadwarrior will negotiate and add a route 
using the default settings:
(meggages): KLIPS ipsec0 on ppp0 141.152.55.223/255.255.255.255 pointopoint 
10.22.1.1

, but my server/gateway now spits an error trying to add the route:

ip route add 141.152.55.223/32 via 141.152.55.223 dev ipsec0

which makes me think there is a trouble due to my client and its DSL modem. 
 From what I can tell, the above command is telling my server to attempt to 
communicate wiith the client 141... using the client as its own gateway, 
and perhaps it should be sending it through some other entity?? From what I 
can gather, my server is not behind any NAT situation, it certainly has a 
static IP, and I do not define a gateway for it to communicate with the 
outside world.

So, any help would be greatly appreciated.

r.b.


Robert Burgholzer
Environmental Engineer
MapTech Inc.
http://www.maptech-inc.com/