[Openswan Users] Cisco PIX and openswan

[Serge Paquin]

Hello,

    Ok I'm making a little headway.  Though I feel a little silly.  I have
the "authby=secret" commented out in my ipsec.conf.

    Anyway I'm getting further now but I still can't get it going.  Below is
the debug log from my PIX. Other than that all configuration and output is
the same as my message yesterday.

Thanks,
Serge.

ISAKMP (0): Checking ISAKMP transform 3 against priority 5 policy
ISAKMP:      life type in seconds
ISAKMP:      life duration (basic) of 3600
ISAKMP:      encryption 3DES-CBC
ISAKMP:      hash MD5
ISAKMP:      auth pre-share
ISAKMP:      default group 2
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): SA is doing pre-shared key authentication using id type
ID_IPV4_ADDR return status is IKMP_NO_ERROR
ISAKMP (0): retransmitting phase 1...
ISAKMP (0): retransmitting phase 1...
crypto_isakmp_process_block:src:67.71.216.114, dest:207.61.27.102 spt:500
dpt:500
VPN Peer:ISAKMP: Peer Info for 67.71.216.114/500 not found - peers:0

ISAKMP (0): deleting SA: src 67.71.216.114, dst 207.61.27.102
ISADB: reaper checking SA 0x116341c, conn_id = 0  DELETE IT!

VPN Peer:ISAKMP: Peer Info for 67.71.216.114/500 not found - peers:0