[Openswan Users] Openswan 2.1.0 on gentoo, Pluto got segmentation fault

[Wolfman]

Hi,
I tried to setup open swan on my system, to get a VPN with Win2k clients. 
But for some strange reason pluto won't start.
I can't see any misconfiguration. So can anyone help?

Thanks
Christian

Here is my demon.log:
[...]
Mar 21 23:18:34 Linuxserver ipsec_setup: Starting Openswan IPsec 
U2.1.0/Kcvs2002Mär12_01:19:03...
Mar 21 23:18:34 Linuxserver ipsec_setup: KLIPS debug `none'
Mar 21 23:18:34 Linuxserver ipsec_setup: KLIPS ipsec0 on ppp0 
<SomeIP>/255.255.255.255 pointopoint <SomeIP>
Mar 21 23:18:34 Linuxserver ipsec_setup: ...Openswan IPsec started
Mar 21 23:18:34 Linuxserver ipsec__plutorun: /usr/lib/ipsec/_plutorun: line 
1:  9623 Segmentation fault      /usr/libexec/ipsec/pluto --nofork 
--secretsfile /etc/ipsec/ipsec.secrets --ipsecdir /etc/ipsec/ipsec.d 
--uniqueids
Mar 21 23:18:35 Linuxserver ipsec__plutorun: whack: is Pluto 
running?  connect() for "/var/run/pluto.ctl" failed (111 Connection refused)
Mar 21 23:18:35 Linuxserver ipsec__plutorun: ...could not add conn "p2n"
Mar 21 23:18:35 Linuxserver ipsec__plutorun: whack: is Pluto 
running?  connect() for "/var/run/pluto.ctl" failed (111 Connection refused)
Mar 21 23:18:35 Linuxserver ipsec__plutorun: ...could not add conn 
"clear-or-private"
Mar 21 23:18:36 Linuxserver ipsec__plutorun: whack: is Pluto 
running?  connect() for "/var/run/pluto.ctl" failed (111 Connection refused)
Mar 21 23:18:36 Linuxserver ipsec__plutorun: ...could not add conn "n2n"
Mar 21 23:18:36 Linuxserver ipsec__plutorun: whack: is Pluto 
running?  connect() for "/var/run/pluto.ctl" failed (111 Connection refused)
Mar 21 23:18:36 Linuxserver ipsec__plutorun: whack: is Pluto 
running?  connect() for "/var/run/pluto.ctl" failed (111 Connection refused)
Mar 21 23:18:36 Linuxserver ipsec__plutorun: ...could not route conn 
"clear-or-private"
Mar 21 23:18:36 Linuxserver ipsec__plutorun: !pluto failure!:  exited with 
error status 139 (signal 11)
Mar 21 23:18:36 Linuxserver ipsec__plutorun: restarting IPsec after pause...
Mar 21 23:18:46 Linuxserver rc-scripts: ERROR:  wrong args. (  _autorestart 
/ _autorestart )
Mar 21 23:18:46 Linuxserver rc-scripts: Usage: ipsec { start|stop|restart }
Mar 21 23:18:46 Linuxserver rc-scripts:        ipsec without arguments for 
full help
[...]

My ipsec.conf:
[...]
# basic configuration
config setup
         # Debug-logging controls:  "none" for (almost) none, "all" for lots.
         # klipsdebug=all
         # plutodebug=dns

# Add connections here.

conn %default
         keyingtries=1
         compress=yes
         disablearrivalcheck=no
         authby=rsasig
         rightrsasigkey=%cert
         auto=add
         leftrsasigkey=%cert
         left=%defaultroute
         leftcert=VPN-Gateway.pem

conn p2n
         right=%any
         leftsubnet=192.168.107.0/24
conn n2n
         right=%any
         rightsubnetwithin=192.168.0.0/24
         leftsubnet=192.168.107.0/24
conn block
         auto=ignore
conn private
         auto=ignore
conn private-or-clear
         auto=ignore
conn clear
         auto=ignore
conn packetdefault
         auto=ignore
[...]