[Openswan Users] Problem with _plutorun script

[desantis at csr.unibo.it]

HI,

I found the error. :) 
Link :

http://msgs.securepoint.com/cgi-bin/get/linux-ipsec-0212/176/1/1.html

Filippo

Scrive desantis at csr.unibo.it:

> This is my syslog:
> 
> Jun 18 12:32:43 gewbecca ipsec_setup: ...Openswan IPsec started
> Jun 18 12:32:44 gewbecca ipsec__plutorun: ipsec_auto: fatal error in
> "packetdefault": %defaultroute requested but not known
> Jun 18 12:32:44 gewbecca ipsec__plutorun: ipsec_auto: fatal error in
> "wintwork":
> ID "%any" cannot have RSA key
> Jun 18 12:32:44 gewbecca ipsec__plutorun: /usr/local/lib/ipsec/_plutorun:
> line
> 1:  7080 Floating point exception(core dumped)
> /usr/local/libexec/ipsec/pluto
> --nofork --secretsfile /etc/ipsec.secrets --ipsecdir /etc/ipsec.d
> --debug-none
> --uniqueids --nat_traversal --virtual_private
> %v4:192.168.0.0/24,%v4:10.0.0.0/24
> Jun 18 12:32:44 gewbecca ipsec__plutorun: whack: is Pluto running? 
> connect()
> for "/var/run/pluto.ctl" failed (111 Connection refused)
> Jun 18 12:32:44 gewbecca ipsec__plutorun: ...could not route conn
> "packetdefault"
> Jun 18 12:32:44 gewbecca ipsec__plutorun: !pluto failure!:  exited with
> error
> status 136 (signal 8)
> Jun 18 12:32:44 gewbecca ipsec__plutorun: restarting IPsec after pause...
> Jun 18 12:32:55 gewbecca ipsec_setup: Stopping Openswan IPsec...
> Jun 18 12:32:55 gewbecca ipsec_setup: Removing orphaned /var/run/pluto.pid:
> Jun 18 12:32:55 gewbecca kernel: IPSEC EVENT: KLIPS device ipsec0 shut down.
> Jun 18 12:32:55 gewbecca kernel:
> Jun 18 12:32:55 gewbecca kernel:
> Jun 18 12:32:55 gewbecca kernel: klips_info:pfkey_cleanup: shutting down
> PF_KEY
> domain sockets.
> Jun 18 12:32:55 gewbecca kernel: klips_info:cleanup_module: ipsec module
> unloaded.
> Jun 18 12:32:55 gewbecca ipsec_setup: ...Openswan IPsec stopped
> Jun 18 12:32:43 gewbecca ipsec_setup: ...Openswan IPsec started
> 
> 
> > > 
> > > > I istalled on my gateway openswan-2.1.2 and i have a problem with
> > > > "ipsec_plutorun" script.
> > 
> > 
> > > It looks like your pluto is crashing. Enable dumpdir=/tmp and rerun it
> to
> > > crash
> > > pluto. Then use gdb pointing to both the source and the core file in
> /tmp
> > and
> > > give
> > > us a backtrace from gdb to investigate this problem.
> > > If possisble, please describe your system and kernel specifics as well.
> > > 
> > > 2.1.2 should have been fixed for the crl.pem crasher AFAIK, but perhaps
> > you
> > > want
> > > to try removing the pem files in /etc/ipsec.d/crls/
> > > 
> > > Paul 
> 
> 
> _______________________________________________
> Users mailing list
> Users at lists.openswan.org
> http://lists.openswan.org/mailman/listinfo/users
>