[Openswan Users] VPN connects then disconnects after a minuite
Brad Chang
openswan at dotnoc.com
Fri Jul 9 21:54:24 CEST 2004
Hi everyone, Basically my vpn will connect and everything looks good. but I
cannot ping anything on the other side but I do see the ESP packets comming
into the interface. I have an open firewall rules at this point so its accept
all. basically I can get it to verify password and register the computer and
give my vpn client an ip address but then after a minuite the connection will
tear down.. below are some logs of this .. thanks for any help . (after the
first connect the vpn server no longer replies back to my client .. I have to
restart ipsec to make it let me connect again) but then it just hangs
on "verifying username and password
==> /var/log/syslog <==
Jul 9 21:45:11 guardfw2 pppd[30103]: sent [LCP EchoReq id=0x2 magic=0x2dcdeb5]
Jul 9 21:45:16 guardfw2 l2tpd[28514]: control_xmit: Maximum retries exceeded
for tunnel 59940. Closing.
Jul 9 21:45:16 guardfw2 pppd[30103]: Terminating on signal 15.
Jul 9 21:45:16 guardfw2 pppd[30103]: Modem hangup
Jul 9 21:45:16 guardfw2 pppd[30103]: Script /etc/ppp/ip-down started (pid
30187)
Jul 9 21:45:16 guardfw2 pppd[30103]: Connection terminated.
Jul 9 21:45:16 guardfw2 pppd[30103]: Connect time 1.1 minutes.
Jul 9 21:45:16 guardfw2 pppd[30103]: Sent 74 bytes, received 84 bytes.
error
Jul 9 21:45:16 guardfw2 pppd[30103]: Waiting for 1 child processes...
Jul 9 21:45:16 guardfw2 pppd[30103]: script /etc/ppp/ip-down, pid 30187
Jul 9 21:45:16 guardfw2 pppd[30103]: Script /etc/ppp/ip-down finished (pid
30187), status = 0x0
Jul 9 21:45:16 guardfw2 pppd[30103]: Exit.
Jul 9 21:45:16 guardfw2 l2tpd[28514]: call_close : Connection 3 closed to
64.180.180.220, port 1701 (Timeout)
==> /var/log/daemon.log <==
Jul 9 21:45:16 guardfw2 l2tpd[28514]: control_xmit: Maximum retries exceeded
for tunnel 59940. Closing.
Jul 9 21:45:16 guardfw2 l2tpd[28514]: call_close : Connection 3 closed to
64.180.180.220, port 1701 (Timeout)
==> /var/log/syslog <==
Jul 9 21:45:21 guardfw2 l2tpd[28514]: control_xmit: Unable to deliver closing
message for tunnel 59940. Destroying anyway.
==> /var/log/daemon.log <==
Jul 9 21:45:21 guardfw2 l2tpd[28514]: control_xmit: Unable to deliver closing
message for tunnel 59940. Destroying anyway.
##After first connection fail and ipsec restart
==> /var/log/syslog <==
Jul 9 21:52:00 guardfw2 l2tpd[28514]: control_xmit: Maximum retries exceeded
for tunnel 29754. Closing.
==> /var/log/daemon.log <==
Jul 9 21:52:00 guardfw2 l2tpd[28514]: control_xmit: Maximum retries exceeded
for tunnel 29754. Closing.
Thanks and best regards,
-Brad Chang
-http://www.dotnoc.com
-------------------------------------------------------------------
hosting,web design and managed services @ http://www.dotnoc.com
More information about the Users
mailing list