[Openswan Users] D-Link DS-601 IPSEC-Client

[Stefan Leippert]

Merry Christmas to everybody and thank you for the great support in this
mailinglist.

Has anybody already tested a connection from D-Link DS-601 Netdefend
IPSEC-Client(WinXP Prof SP1) to Openswan ? 

NAT-T works, but I always get a decrypt-error from the DS-601 and openswan
says:

Dec 25 20:55:47 localhost pluto[11200]: "vm-net"[1] 192.168.0.50 #1:
NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike-02/03: peer is NATed
Dec 25 20:55:47 localhost pluto[11200]: "vm-net"[1] 192.168.0.50 #1:
transition from state STATE_MAIN_R1 to state STATE_MAIN_R2
Dec 25 20:55:47 localhost pluto[11200]: "vm-net"[1] 192.168.0.50 #1:
ignoring informational payload, type IPSEC_INITIAL_CONTACT
Dec 25 20:55:47 localhost pluto[11200]: "vm-net"[1] 192.168.0.50 #1: Main
mode peer ID is ID_IPV4_ADDR: '192.168.30.29'
Dec 25 20:55:47 localhost pluto[11200]: "vm-net"[1] 192.168.0.50 #1: no
suitable connection for peer '192.168.30.29'
Dec 25 20:55:47 localhost pluto[11200]: "vm-net"[1] 192.168.0.50 #1: sending
encrypted notification INVALID_ID_INFORMATION to 192.168.0.50:500
Dec 25 20:55:57 localhost pluto[11200]: packet from 192.168.0.50:500: ISAKMP
version of ISAKMP Message has an unknown value: 38
Dec 25 20:55:57 localhost pluto[11200]: packet from 192.168.0.50:500:
sending notification INVALID_MAJOR_VERSION to 192.168.0.50:500


Using Openswan2.3DR4...

Thank you for help !

Stefan